Windows 10: Laptop wont boot after windows automatically chckdsk my ssd.

Can anyone help me. It justs bluescreens when i turn it on.

submitted by /u/cosinenigmatic
[link] [comments]

:)

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Booted desktop SATA SSD with laptop M.2 SSD now the desktop SSD won't work (both have windows 10 installed)

A little backstory, both SSD's have windows 10 on them with different license of course.

I wanted to read the laptop SSD as a regular drive so I can export files from, into my new desktop. I placed the laptop ssd into the desktop while it was running, but there was nothing to be found in disk management, so i rebooted.

After rebooting, i unexpectedly found that it booted into my laptop's windows with it's SSD as C: , instead of my desktop's.

I then copied the files i needed from my laptop's ssd into a third formatted ssd and proceeded to attempt to reboot into my desktop's windows with the original SATA ssd.

Now my original windows on the SATA ssd wont boot and is stuck on automatic repair loop, while booting from my laptop's m.2 windows and SSD works perfectly fine.

I need to boot from my original SATA ssd because I wont be needing my m.2 laptop SSD.

I have an ASROCK B450M/ac motherboard

(You might suspect that windows dual boot have replaced the boot files of the first drive, and now it depends on the second drive to boot, but even with the second drive in, the windows on the first drive still wont boot. I can still access all the data
in my SATA SSD through my m.2 ssd's windows).