Windows 10: Latest Windows 10 Pro "Features" update stuck

I tried running the latest Windows 10 Pro "Features" update yesterday and it froze at 47% for a few hours. I forced a restart Held power button and it came back up after removing changes made. So last night I tried again. When I did the restart to complete the screen flashed over to the "Working on updates, Please don't turn off your PC" it got to 48% the spinning dots have stopped spinning and it has been on that screen for the last 2.5 hours. I know it says this will take a while but how long is a while? Since I am already so many hours in to this I hate to bail out again and have to start over. Any thoughts?

-Phil

:)

 

Microsoft to make Windows 10 updates mandatory

Well, at the moment at least, you can choose to defer upgrades. Under Settings > Windows Updates > Advanced options you need to check the box labeled "Defer upgrades". What does that do? Good question. The answer I've found might illuminate it to a degree.

http://windows.microsoft.com/en-us/windows-10/defer-upgrades-in-windows-10

I hear this only applies to Pro and Enterprise editions. But I can't verify that.

 

Win10: windows update stuck at never ending loop ?

When in win10:

• Update&security -> Windows update -> Finding update... .... .... ....

Planning to download the latest Win10.ISO (vers.1803) and manually update:
- Then wait that my ordered new SSD arrives and clone the old HDD to it.

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?