Windows 10: Leave this here :

Thought to share some fun and love : https://youtu.be/njos57IJf-0

:)

 

how can i leave windows insider program if i don't have a windows machine

Hi,



Thank you for writing to Microsoft Community Forums.



We would suggest you to follow the steps mentioned below and check if it helps.

1. Log in in to
   Windows Insider.
   
2. Click on the Leave program link at the bottom of the resulting page.
   
3. Then follow on screen instructions.
   

You can also refer to
Leave the program confirmation for confirmation.





Hope it helps.

Let us know if you got the help you needed by clicking Yes or No.





Manjunath H

Microsoft Community – Moderator

 

Quick question: E8400 @ 4ghz

speed step is usually cntrolled by two functions in bios both EIST and C1E are for the multiplyer and the voltage drop if any.

Up tp this point I usually leave it all on, but with my latest E8600 I did have stability issues under testing for stability. I have since also updated the bios, andI have not went back to enable it and test correctly yet.

I suggest you leave them off, and verify the CPU is stable. If all is good enable speed step and see if she still plays nice.

 

No Boot, Drives Not detected, Can't Load Win10 Pleses Help!

Until the BIOS sees your M.2, there's nothing you can do. It does not matter if the M.2 is unformatted/unallocated, the BIOS should see it.

1. Suggest that you take the M.2 out, clean all the contacts and re-seat it and hope this is the case.
2. If step one fails. Connect your 250GB SSD back in using one of the SATA port to see if the BIOS recognize it. If it doen't, then it might be something wrong with the MB, if it does then boot up the Windows Installation USB, run diskpart, shrink it at least 40GB then create a partition, Leave it unallocated then install Windows there.

Also try to re-seat all other components such as Memory, Video card etc...