Windows 10: Lenovo boot up fail

I have a Levono IdeaPad S145, It came up with an error code d0000452. Computer starts okay, then the Levono logo comes up and highlights it's attempting a repair, from there none of the advanced options work, so I'm stuck.Most recent was an windows 10 update, I have tried to access the safe mode but can't. It seems a common issue so there must a workable fix without losing my files, anybody? Looked at previous threads and it doesn't seem anyone got it sorted, so fingers crossed!I use the computer for general personal use, so not tech savvy.

:)

 

HD 5870 Bios flash failed

mp3 player is in FAT / FAT32 format ?

Set Boot up first to the drive with hiren bootcd 10.4
Done...

the options will pop out after loading the disc choose

boot cd

then the list (step by step)

Next...
Dos....
USB Drivers....
Load USB Drivers with no386.....

Ask you load cd drivers. NO
Ask you load SCSI drivers. NO
Ask you anything NO.
USB driver list comes out. 8 Don't choose anything else.

type
C:\ (that should be your mp3 player if you did it right)

atiflash -i
to list the adapters

atiflash -p -f 0 ???.bin

done.........

 

Lenovo G500 Booting Issues

Hi Forhad,

I appreciate the steps that you have tried, I would suggest you to try the below steps as well and check if it helps.

Method 1: Run the System Maintenance troubleshooter and check if it helps.

• 
  Type troubleshooter in the search box and then press enter.
  
• 
  Select Troubleshooting. Click on
  view all and select System Maintenance.
  
• 
  Click next and follow the on-screen instructions.
  

Note: I would suggest you to disconnect all the external devices other than mouse and keyboard and check if it helps.

Method 2: Enable Fast Start Up on the system and check if it helps. To do this, follow the steps below.

• 
  Open Control Panel and go to Power Options.
  
• 
  Click/tap on the Choose what the power buttons do link on the left side.
  
• 
  Click/tap on the Change settings that are currently unavailable link at the top.
  
• 
  If prompted by UAC, then click/tap on Yes.
  
• 
  Ensure that Turn on Fast Startup is checked.
  
• 
  Restart the computer.
  

Method 3: Boot the computer in a clean boot state and check. Setting the system in a clean boot state will help to identify if any third party applications/drivers or startup items are causing the issue.

Refer the article and check if it helps.

How to perform a clean boot in Windows

Note: After clean boot troubleshooting steps, follow the section
"How to reset the computer to start as usual after troubleshooting with clean boot" in the provided link to return your computer to Normal startup mode.

Hope it helps, let us know how it goes.

 

Lenovo Y50 / EFI network boot failure

According to Microsoft it is too small.

Anyway, you are also supposed to have the 500GB hard drive.

Lenovo Y50 Specifications

• Windows 8.1 (64-bit)
• 2.4GHz Intel Core i7-4700HQ.
• 15.6” FHD (1920 x 1080) LED Backlit.
• NVidia GeForce GTX 860M (4GB of DDR5)
• Intel HD Graphics 4600.
• 16GB DDR3.
• Hybrid 1 TB HDD (5400 RPM) + 8GB SSD.
• Bluetooth 4.0.

@@@@@@@@@@@@@@@@@@@@@@

I originally asked you to first check Boot Order and you said you got the PXE error

There are normally 3 possible reasons for that error you have.

1. BIOS Boot Order set to Boot to Network: Check BIOS settings for Boot Order.

2. Check cable connections between Motherboard and Hard Drive.

3. Failed Hard Drive.

I have also looked through Lenovo forums for your errors:

English Community-Lenovo Community

English Community-Lenovo Community

English Community-Lenovo Community