Windows 10: Lenovo docking station issues after installing KB5015807

Hi,After installing the KB5015807 on my lenovo thinkpad machine, my auxiliary desktop screens my docking station keeps freezing. What I realized was it was the docking station that is actually the cause of it. Any idea if this KB update has an impact on the USB ports, specifically for Lenovo machines?

:)

 

Lenovo T450S laptop docking station issue

I am having difficulty utilizing a docking station with my Lenovo T450s laptop. I purchased the laptop in 2016 and it is running Windows 10. At the time of purchase I also bought a Lenovo docking station. At the suggestion of an IT person, I recently purchased a "Plugable USB 3.0" docking station.

The issue I am having now with both docking stations is that my second monitor does not get detected and only works when I connect directly to the laptop and it does not transfer the wired internet signal from the docking station to the laptop. The signal is fine when I connect directly to the laptop. All of the USB ports on the laptop are USB 3.0.

I was under the impression that I could plug the power for the laptop and one cable from the docking station and would be good to go. The printers connected through the docking stations work fine. I take my laptop home with me every day from work. Any suggestions to try?

 

I cannot connect to home Wi-Fi off the docking station but not on docking station.

1. I cannot connect to home Wi-Fi off the docking station but not on docking station.
2. When i'm on docking station system says i'm connected to home Wi-Fi, but when i browse says not connected.
3. Other devices connected to home Wi-Fi has no issue.
4. What steps can i take to resolve the issue other than updating Wi-Fi adapter driver?

 

DVI not working on extended monitor with Surface Book docking station

Hi,



Thank you for posting your query in Microsoft Community.



I understand your concern and will assist you to resolve this issue.

I suggest you to follow the steps below and check if it helps.

• 
  Make sure the power light for the docking station is on
  
• 
  Make sure the monitor is getting power
  
• 
  Make sure the cable is connected properly to the monitor
  
• 
  Unplug and reconnect the Mini-DVI adapter on the back of your docking station
  
• 
  Try flipping the connector for the adapter over (turns out some adapters can go in upside-down)
  
• 
  Take the Surface out of the docking station then put it back in
  
  
  

Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help.