Windows 10: Lenovo laptop with Windows 10 won't boot

We have a Lenovo Z710 that has been running W10 for several years, with the periodic updates. It has not booted for the past couple weeks. Normal power on slowly gives a "preparing automatic repair" message. Start-up with the novo button gets it to the novo menu normal start-up, BIOS setup, boot menu, system recovery. Built a USB drive from MediaCreationTool22H2.exe. When inserted, it shows up in boot manager and can be selected, but it doesn't look like the laptop never tries to update from it. The data available in BIOS setup all looks goods OK. A few times, we have gotten a message saying

:)

 

Laptop went black and won;t reboot

Hi Andree,

Hardware and software conflict is one of the possible reasons why you're experiencing black screen. Sometimes, it is also because of hardware failure. To get this issue fixed, we suggest that you
boot into Safe Mode by following these steps:

• Turn off your computer 3 times while booting. Windows should automatically boot to the Recovery Environment after 3 unsuccessful attempts in a row.
  
• Once you are within the Recovery Environment, select Troubleshoot, and then
  Advanced options, then Startup Settings, and
  Restart. When it restarts, you should see a number of options. Press 5 or F5 for
  Safe Mode with Networking.

Once your computer is in Safe Mode, please follow the workaround provided on this
link. Simply select the similar case that you're experiencing to show the troubleshooting steps.

Let us know how it works.

 

Laptops can't boot from optical HDD\SSD caddy :-(

Hello
I have been investigating *a lot* and trying to boot a 2015 year HP Pavilion DV7 17-f076no (Serial: J1X05EA#UUW) from a Chinese Ebay optical drive HDD\SSD caddy:
Read multiple forum questions that had the same problem as I: ( Bios can't find a bootable SSD inside optical caddy )
https://forums.lenovo.com/t5/Lenovo...find-caddy-SSD-in-BIOS-boot-list/td-p/3278964
http://www.tomshardware.co.uk/answers/id-2059129/bios-recognize-hdd-hard-drive-caddy.html

Startup:

• Cloned a 1000gb HDD containing 100/1000gb of Windows 10 Home 64-bit to a 500gb SSD with a EZ Gig IV 4.6.2 cloning software and a USB-SATA transfer cable.
• Original 1000gb HDD is still inside the laptop.
• DVD-drive replaced with a 500gb SSD caddy.

So far:

• The SSD (=2018 Samsung 860EVO 500gb) can be used and seen inside Windows 10. ( As a storage only )
• The 2015 Bios F.43 Rev.A American Megatrends Inc. can not see the SSD from the BIOS boot order. Windows Boot Manager sees only the original HDD.
• UEFI Legacy boot-mode is disabled. I don't think enabling it would help since I'm starting up Windows 10.

Solutions:

• Faulty caddy ? Chinese sellers sell many multiple variations of different 9.7mm thick caddys with different micro switches. This one had only a 1 pc of micro switch with 2 position choices.
• Bios is just not flexible enough. Open the 20+pcs of laptop screws and put the SSD to the place of the original HDD.
• UEFI Legacy mode ?
• Modding the caddy. Someone said the caddy is in a "power saving sleep mode" when inside BIOS and it is therefore unseen and shortening some pins would help ? Any experience in soldering the caddy electronics so that it is constantly awake ? This sounds believable ?
• Cloned the HDD twice to minimize errors but no help I doubt it is because of the cloning process and if it is it is because the HDD and SSD were not the same size 1000gb and 1000gb and the partitions don't match or so...?

Laptops are not easy...

 

Hp laptop screen won’t display except occasionally

I would like to note that step 20 comes up with no files. Perhaps this could be the source of the issues?