Windows 10: Lenovo PC

When I turn on my computer, the screen is black and it just beeps, nothing else?

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

How to enable touch screen function on Lenovo ideapad 500

Hello,

I suggest you to follow the steps mentioned below to enable touch in Lenovo idea pad. Please perform the steps and check if you can enable your touch screen.

Steps:

• Right click on the Start Menu, locate and click on
  Control Panel.
• Click on View by: Category and change it into
  Large or Small Icons.
• Click on Pen and Touch, once there click on theTouch tab and check the option
  “Use your finger as Input Device”.

For further assistance I suggest you to contact with Lenovo support:

http://support.lenovo.com/us/en/



Hope this information was helpful. Please let us know the status of your issue so that we can assist you further.

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it