Windows 10: lesson number 3 acces

Hello.


Just bought microsoft 2020 standard flight simulator. Beging training with the cessna. I have made lesson 1 and 2. I can gaing access to lesson 4 landing etc... Cannot gain access to lesson 3; take off and level flight. The nr 3 lesson does have a cloudy picture.

:)

 

Trouble saving voicemail number

To access my voicemail it is my phone number, a pause and 4 digit pin.



I did the following steps:

• Turned off default voicemail number
• Added a , (for pause) at end of my phone number
• Added the 4 digit pin

I get the following error message We're having trouble saving your voicemail number right now. Try again later.



Any suggestions on how to correct this?

 

Edge Search Does Not Permit Change of Region


I got these suggestions from the Microsoft Community forum.No. 1 worked for me:

Thank you for posting the query on Microsoft Community. I am glad to assist you on this.
We have reproduce the issue here and we are able to access non-regional search for google using Microsoft Edge.
I would suggest you to try the below steps and check if it helps.
Step 1:
Clear browsing data option of Microsoft Edge and check if you face the issue. To do so perform the steps below.

1. Click on the More actions icon next to the feedback icon present on top right corner of the Project Spartan homepage.
2. Select Settings and click on Choose what to clear.
3. Check the boxes Browsing history, Cookies and saved website data and Cached data and files and click on Clear.

Step 2:
I suggest you to create a new user account and check if the issue occurs.

1. Go to Settings.
2. Choose Accounts and then select Family and other users.
3. Select add someone else on this PC.
4. Enter a user name and hit next.
5. Click on Finish.
6. Sign out from the current Account and Log into the new account.

Step 3:
It could also happen because of network issue. I suggest you to try with different network connection and check if it helps.

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!