Windows 10: Loading screen after usb drive

My laptop started lagging so i started to restart it. After restaring it showed preparing automatic repair and had been that for 8 hours and more. So i created a bootable usb drive and changed my boot priority order to usb hdd at first position and then after inserting the drive and starting my laptop it just keeps on loading at my laptpp manufacturer's lenovo screen. Please helpIf you need any other related info pls reply

:)

 

HD 5870 Bios flash failed

mp3 player is in FAT / FAT32 format ?

Set Boot up first to the drive with hiren bootcd 10.4
Done...

the options will pop out after loading the disc choose

boot cd

then the list (step by step)

Next...
Dos....
USB Drivers....
Load USB Drivers with no386.....

Ask you load cd drivers. NO
Ask you load SCSI drivers. NO
Ask you anything NO.
USB driver list comes out. 8 Don't choose anything else.

type
C:\ (that should be your mp3 player if you did it right)

atiflash -i
to list the adapters

atiflash -p -f 0 ???.bin

done.........

 

Can't put ISO file on USB drive

Don't give up yet!
(i) If you used Option 1, did you get to select a USB stick in step 8? If so,
(ii) Did you reach step 11 - 'USB flash drive ready' ?

If so, you should be good to go - the USB drive should be bootable. You can check this by either examining it with file explorer, or attempting to boot your PC from it. In post 13 NAVYCLDR showed a screen shot of what the folder structure on the USB stick should look like - if it does, you should be done, but I would suggest you try to boot from it: assuming it boots up, don't proceed any further, unless you want to re-install or otherwise fix something.

I don't believe you ever explained why you wanted an install USB?

 

help. USB drive isn't assigned a drive letter.

Any usb flash drive I plug into my computer isn't assigned a drive letter. The physical drive shows in the "safely remove hardware" but it doesnt show up in disk management. I have tried to populate the volume thru the safely remove hardware properties window and it does pop up in the list but it doesn't stay there. This isn't a format or assign a letter problem. It's more complicated then that. Maybe one of the services needed for usb drive management was disabled? Suggestions needed. btw external usb harddrives work fine.