Windows 10: Locked drive/raw drive/access denied when formatting

So I'm trying to reinstall windows in my laptop using my bootable usb. However, my ssd becomes raw it as far as I know it must be converted back to ntfs. I tried to format it but it says access denied. So in my disk there's two volume, and the raw is I think the bootable system and the another volume have no Fs type, which as a greater size 238gb. So I tried to chkdsk this drive and it says that I don't have any access to it. Please help me guys. I want to reformat it and reinstall windows, that's all.

:)

 

Save RAW drive - Don't want data


Open Admin command prompt, then type:

1. diskpart
2. list disk ======> Take note of disk # of the RAW drive
3. select disk # ======> is the number in step 2
4. clean
5. exit

Open Disk Management and initialize it, Create Simple, format.

 

D drive is showing, but access denied.

Thanks for reaching out! I'm an Independent Advisor and a Microsoft user like you.

To resolve the "access denied" issue on your D: drive in Windows 11, follow these comprehensive steps to diagnose and fix the problem. These steps include taking ownership, running CHKDSK, and modifying the registry.

Step 1: Take Ownership of the Drive

1. Open Command Prompt as Administrator:
   
   • Press Windows + X and select "Windows Terminal (Admin)" or "Command Prompt (Admin)".
     
2. Take Ownership:
   
   • Type the following command and press Enter:
     
     
   • This command will recursively take ownership of the D: drive, granting your user account the necessary permissions.
     

Step 2: Run CHKDSK

1. Open Command Prompt as Administrator:
   
   • As in Step 1, open the Command Prompt with administrative privileges.
     
2. Run CHKDSK:
   
   • Execute the following command:
     
     
   • Explanation of parameters:
     
     • /f: Fixes errors on the disk.
       
     • /r: Locates bad sectors and recovers readable information.
       
     • /x: Forces the volume to dismount first if necessary.
       

Step 3: Modify the Registry to Display the Security Tab

1. Open Registry Editor:
   
   • Press Windows + R, type regedit, and press Enter.
     
2. Navigate to the Explorer Key:
   
   • Go to:
     
     
3. Check or Create NoSecurityTab:
   
   • Look for a DWORD entry named NoSecurityTab.
     
   • If it exists and is set to 1, right-click on it, select "Modify", and change the value to 0.
     
   • If it does not exist, create it:
     
     • Right-click on the Explorer key, select New > DWORD (32-bit) Value, name it NoSecurityTab, and set its value to 0.
       

Step 4: Check Disk Management

1. Open Disk Management:
   
   • Press Windows + X and select "Disk Management".
     
2. Check the D: Drive Status:
   
   • Locate the D: drive and check its status.
     
   • Look for any errors or unusual statuses (like RAW). If the drive shows as RAW, it may need to be formatted, but only consider this as a last resort due to data loss risks.
     

Additional Tips

• Update Windows 11:
  
  • Ensure your system is up to date by going to Settings > Windows Update and checking for updates.
    
• Use Third-Party Tools:
  
  • Consider using third-party disk management tools like EaseUS Partition Master or similar to diagnose and repair disk errors.
    

Important: Backup Data

Before proceeding with any major changes or repairs, ensure you back up any important data from the D: drive if possible. Data recovery services should be considered if you suspect severe disk corruption or hardware failure.

If none of these steps resolve the issue, the problem might be more complex, potentially involving hardware failure or severe file system corruption. In such cases, professional data recovery services may be necessary.

Please do let me know if the method I suggested works for you or if you need further assistance.

 

Can't format a RAW drive to NTFS

I recently received a new SSD and installed it into my system. I tried to format it into NTFS, which turned into the RAW format. When I try to reformat the drive in the Disk Management tool it says," The format did not complete successfully." I looked up some tutorials on this and it sent me to CMD. I ran as administrator and typed

Diskpart

list disk

select x disk

list volume

select x volume

format fs=ntfs

then it tells me "A Device Which Does Not Exist Was Specified"

I can't format the drive to NTFS I'm really confused, I have never had this happen before. any help would be appreciated