Windows 10: loose LINE ( USB SOUND DEVICE ) audio settings after every turn off of a 3 year old PC,...

I have been losing the audio settings for LINE ( USB SOUND DEVICE ) ,why ?

I have to redo them each time I power up of the PC.

This is a 3 year old PC running Windows 10.

:)

 

Problem with audio devices

Hi Marcello,

I appreciate you for trying some steps in order to get the issue resolved.

If you're connecting to an audio device using USB or HDMI, you might need to set that device as the default.

Open Start, enter Sound, select it from the list of results, and then, on the
Playback tab, select a device, then Set Default.

I would also suggest you to turn off Audio enhancements.

• 
  Go to Start, enter Sound, and select Sound Control Panel
  from the list of results.
  
• 
  On the Playback tab, right-click (or tap and hold) the
  Default Device and select Properties.
  
• 
  On the Enhancements tab, select the Disable all enhancements
  check box and try to play your audio device.
  
• 
  If that doesn't work, select Cancel and, on the Playback
  tab, select another default device (if you have one), select the Disable all enhancements check box, and try to play audio again. Do this for each default device.
  

Please revert if you face any issues with Audio.

Thank you.

 

USB Audio Codec Driver

Hello,

To help resolve your concern, follow these troubleshooting steps:

Method1: Check Device Manager

• Open Start,enter
  Device Manager,and select it from the list of results. Under
  Sound, video, and game controllers,select your sound card, open it, select the
  Driver tab, and select
  Update Driver. If Windows doesn't find a new driver, look for one on the device manufacturer's website and follow their instructions.

If that didn't work, try this:

• Uninstall your audio driver: open Device Manager,
  right-click (or tap and hold) the audio driver, and select
  Uninstall. Restart your device and Windows will attempt to reinstall the driver.
  

And if that didn't work, try using the generic audio driver that comes with Windows. Here's how:

• Open Device Manager,right-click (or tap and hold) your audio driver
  > Update driver software... > Browse my computer for driver software > Let me pick from a list of device drivers on my computer,select
  High Definition Audio Device,select
  Next,and follow the instructions to install it.

Method 2: Check the cables and volume

• Check your speaker and headphone connections for loose cables or the wrong jack.
  
• Check your power and volume levels, and try turning all the volume controls up.
  
• Some speakers and apps have their own volume controls, and you might have to check them all.
  
• Try connecting using a different USB port.
• And remember that your speakers probably won't work when headphones are plugged in.

Method 3: Set default device

If you're connecting to an audio device using USB or HDMI, you might need to set that device as the default.

• OpenStart,
  enter Sound,
  select it from the list of results, and then, on the Playback
  tab, select a device, then Set Default.
  

If your Drivers are up to date, then the problem would be the compatibility of Audio-Technica AT-LP120 to your computer, and not the software. We suggest you to seek assistance with

Dell support for further help.

Regards.

 

Disabled motherboard audio device disappears from sound configuration

Win 10 on a Gigabyte Z170X mobo. This board has Creative Soundblaster audio as well as the Intel chipset audio that goes out HDMI cable. Both were working but at some point the system sent some audio to the monitor instead of the Creative device which goes
to external speakers.

So I selected "disable" on the two Intel audio devices (one for HDMI, one for display miniport). Instead of appearing "disabled" they simply disappeared from the sound configuration list. They remain in the Devices list and are listed as "enabled". But
since they are no longer listed in the Control Panel sound configuration settings, I can't turn them back on. Rebooting made no difference: still listed as enabled devices, but still not present in Control Panel sound settings.

I'd like to get the Intel devices back so I have the option of using them. Any suggestions please?

Thanks very much.