Windows 10: Lost Ethernet network on one system

On reboot, I completely lost ethernet connection to internet. I still see other systems on LAN.

I tried "netsh winsock reset" but that did not help.

I tried "Setup new connection or internet" but that does not recognize the cable.

:)

 

Internet and Network by Ethernet lost


I'm on build 10122. After an hour or so of operation I lose all network access by Ethernet using the built-in Broadcom NetLink Gigabit adapter. If I plug in a USB WiFi adapter all network and internet access is okay. Reboot and the Ethernet access works again. I believe this may have been happening on earlier builds less often but I didn't use them on a regular basis as I am now trying to do with this build. The device manager says the Ethernet is working properly but the Ethernet Status clearly says there is a problem, see the picture below. The driver update says it is installed and is the latest version. Meanwhile the system appears to be trying to make the Ethernet connection as DU Meter is indicating a constant 123 kbps upload that it doesn't normally do. I'm sure its the Ethernet adapter because if I "disable" the adapter then the 123 kbps stops. However the disabling never finishes and the driver/adapter won't uninstall.

 

Internet and Network by Ethernet lost


Hi,

This is how I got my wired ethernet adapter to show up in Network Connections:

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs