Windows 10: Lots of BSOD after hardware updates

I recently updated all the hardware for my system. I didn't reinstall windows because I'm hoping to avoid that due to so many work applications being configured a certain way.


I'm getting a lot of BSODs now and am having problems verifying what the cause is.


System Specs:

Windows 10 Pro 64-bit

AMD Ryzen 9 3900x 3.80GHz

32GB G-Skill RAM

MSI B450 Tomahawk Max

465GB Samsung SSD 850 EVO 500GB SATA SSD

1863GB Seagate ST2000LX001-1RG174 SATA

931GB Seagate ST1000DX001-1NS162 SATA

111GB KINGSTON SV300S37A120G SATA-2 SSD

931GB Samsung SSD 970 EVO 1TB Unknown SSD

2047MB NVIDIA GeForce RTX 2060 Gigabyte


Here are the dmp files from recent crashes: https://www.mediafire.com/folder/53obxpdahkjsr/DMP


I appreciate any insight or assistance!

:)

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast:

 

MACHINE_CHECK_EXCEPTION BSODS error

Hi Danicela,

Thank you for posting in Microsoft Community. I understand that you are getting the error MACHINE_CHECK_EXCEPTION BSODS be rest assured, we are happy to help you.

Appreciate you for trying to fix the issue by yourself.

There area lot of CPU functions that are disabled in safe mode ( You may use your favorite search engine and perform a search). Let's follow the steps below and try resolving the issue.

First run the hardware and device troubleshooter and check.

• 
  Type troubleshooting in the search bar.
  
• 
  Click view all in the left panel.
  
• 
  Select ‘Hardware and devices' and follow the on-screen instructions.
  

I suggest you to contact your manufacturer and update the BIOS. Machine Check Exception is related to the BIOS. After BIOS is updated, it should be fine.

Hope this post helps. Get back to us for further queries. We are happy to help!

 

BSOD when updating W10 Insider Preview (installation)

The BSOD minidump did not display a definitive misbehaving driver.
All of the BSOD have been C2 Bad pool caller.
The suggested steps for finding cause and effect are RAM testing with Memtest86+ version 5.01 and Windows driver verifier.
If the Memtest86+ version 5.01 displays malfunctioning RAM / DIMM /MB then the troubleshooting will be completed once the hardware component is identified. If the Memtest86+ version 5.01 is negative then the next step would be windows driver verifier.
If you prefer a clean install that is another option if hardware is ruled out.

The memory dump will take a while to download. So it will be troubleshooted later today.