Windows 10: M.2 NVMe USB3 enclosure with 2TB PCIe M.2 NVMe SSD not recognised in Window 11

My Icy Box IB-1817MCT-C31 USB3 M.2 NVMe enclosure with Kingston Fury Renegade PCIe M.2 NVMe 2TB SSD is not recognised in Windows 11 Home 24H2 on my Acer Aspire C27-195ES AiO, Intel Core Ultra 7 with 32GB RAM. Windows is fully updated.The above PC has 3x USB 3.2 Gen 2 ports all of which work normally with a WD Elements 4TB HDD connected. This HDD had previously been connected to a Windows 10 22H2 PC with USB 3.0 and worked normally there too.The above mentioned Icy Box enclosure and SSD are fully functional on 2 other PCs both running Windows 10 22H2 with USB 3.0When the Icy Box enclosure with

:)

 

Clone present nvme pcie ssd to replacement nvme pcie ssd?

I have a 500GB M.2 2280 NVMe PCIe SSD (boot drive) that I want to replace with a higher capacity M.2 card.

Where do I put the new SSD during the NVMe to NVMe cloning process? My mobo only has one M.2 slot for NVMe SSD's so do I want to use an external adapter for one of the M.2 cards? If so, do you have a recommendation?

If you have solved this issue for your desktop or laptop I would like your advice on if and what extra hardware you needed during the cloning.

please remember that I am dealing with PCIe NVMe drives ONLY. NO Sata is involved except possibly for a connecting cable from the desktop to an adapter. I am experienced with cloning SATA III drives but cloning NVMe is a little
new to me.

Computer: Dell XPS 8920, 32GB ram.

Present SSD: KXG50ZNV512G NVMe Toshiba 512GB

New SSD: CT13049074 Crucial P1 NVMe PCIe M.2 SSD 1TB (or 2TB if available soon) or similar storage device.

Windows 10 Pro for Workstations, version 1809.

 

about intel optane memory + NVMe™ M.2 SSD

nitially

intel optane memory M10(16,32,64gb)PCIe NVMe M.2 3.0x2 was for accelerating 2.5'SATA mechanical HDD regardless of which generation intel CPUs.

also note :

not talking about Intel® Optane™ Memory H10 with Solid State Storage (32gb+1tb, 32gb+512gb ,16gb+256gb)PCIe NVMe3.0x4 that comes as a single m.2 drive which is mounted on single m.2 slot

but now why

intel optane memory M15(16,32,64gb)(PCIe NVMe 3.0 x4)is-- paired with --PCIe® NVMe™ M.2 SSDs {which is mounted on two differnt m.2 slots on 7th ,8th and 9th gen intel CPUs}

what is the purpose

ex: 512 GB PCIe® NVMe™ M.2 SSD + Intel® Optane™ memory 32 GB on (Intel® Core™ i7 9750H) seen from HPs Omen X 2S - 15 Gaming Laptop.

 

Migrating Windows 10 from m.2 sata to new pcie nvme ssd

Hello all,

I'm going to upgrade my current m.2 sata 128gb to a m.2 pcie nvme 480gb and have questions about migrating Windows over. From my understanding since i have a laptop and cant connect both drives at the same time and pcie nvme isnt supported externally I was
going to try and create a restore disk of my current drive and then image it to my new drive. Will this work?

Again my process will be, create rescue disk and image to usb, power down and swap drives, enable usb boot to my usb and power on, run the rescue disk and image to my new pcie nvme ssd.

Does anyone see problems with this? Do I need a large usb or will 32gb work for a 128gb ssd?