Windows 10: M.2 works in other computers apart from mine

I have a sandisk m.2 that works in other computers but when i try to use it on my motherboard it doesnt show up in bios or disk managment my motherbored is an arous z390 any ideas?

:)

 

Crysis gaming computer - will this work?

Specs look fine apart from that PSU. Change it as suggested above.

As for Crysis gaming, just to give you an indication I played that game smoothly on my rig as listed on the left @1280x1024 (on my 17") with everything on high apart from 3 options (textures and 2 others on medium).

 

M.2 SSD not being able to boot from it, windows doesn't recognise.

Ok, this is what happened after all the comments and suggestions, @dude: Thanx for the video, my mb had non e of those settings, it had the raid/option memory gene or achi. Can only choose one or the other. @Saltgrass, my settings did point out auto and enabled the pcie x4, gen 3. I did an bios flash as suggested, because my bios was not the latest version, after a reformat the m.2 was picked up, still cant install OS onto it as it states legacy not found, removed my dvd rom from the sata port to another, and the drive was found and installed. Only issue now is that it's still not my OS drive but it at least now works and is installed, but on the Intel rst drive the obtain memory gene option to enable is greyed out, and shows as disabled. However the program lists the M.2 and it is working 100%,. I installed overwhatch onto it, it performs perfectly. But will update the intel driver tonight and see if that makes any difference. Seems the bios flash enabled the settings listed by @dude that was not present pre-flash.

So the m.2 drive works. I can game off it and install omnto it. Can not install windows on it, gene memmory is enabled, pcie x4 is on and on auto detect, Motherbaord lists all the drives connected, motherboard ahs been updated to latest bios. After flash new settings became available, m.2 is now on memmory gene enabled not achi, windows os is enabled and fast boost is enabled, intel rst is installed and lists all the ssds and the m.2, however the m.2 on memmory gene is dissabled and the option to enable is greyed out. Will update the driver as Essenbe suggested of the m.2 and see if anything changes. Thank you all for the help, I can now atleast use my m.2

 

M-Audio M-Track 2x2 Not Recognized by my computer.

Hi,



Thank you for writing to Microsoft Community Forums.



We appreciate the research and troubleshooting you have done, this issue could be from the software end or from the hardware itself.



Please try few of the troubleshooting below to further eliminate the root cause of the issue.

1. Try to connect the device with a different USB and check if that helps.
   
2. Connect the M-track to different computer and check if you still face the issue there, if the issue persists, it could be caused by hardware.
   

Method 1:

1. Press Windows + R key on your keyboard together, and type
   control printers.
   
2. You will see list of all the devices and printers connected to your computer.
   
3. Click on Add a device and follow the onscreen instruction and add your device.
   

Method 2:

1. Uninstall
   all the M-Track drivers from device manager.
   
2. Reboot the computer and check.
   

Method 3:



I suggest you login to the manufacturer site,
download the drivers for your registered device and
install it.



If you still face the issue, I suggest you to get in touch with the
manufacturer and get the hardware checked once.



Hope it helps.

Amit Sunar

Microsoft Community – Moderator