Windows 10: M-Audio M-Track Sound Card Input Un-recognized

Hello,My M-Audio 2x2 Sound Card Drivers are installed & Functioning in my Music Softwares no problem with that.My issue is that the Card is showing in my PC Sound Output Devices like shown in the picture belowBut the M-Audio 2x2 Device is not showing in the Sound Input Device Section so i can use the MIC connected to the Sound Card directly on windows without the use any Music Software, so i can use for broadcasting or voice & video calls, etc..Example in the below imageHope you can help figuring up the issue.Note: Please notice that a MIC is plugged to the sound card input Original M

:)

 

Issues with audio recording using M-Track input device, Windows 10 1809.

Hi Richard,

We see that you are facing difficulties in audio recording using M-Track. Could let us know, are you referring to M-audio M-Track device? However, we recommend you to refer

Troubleshoot audio recording from Audacity and try performing the steps and check.

If you are referring to M-audio M-Track, please try downloading driver and firmware for the device and microphone form
M-Track download Support check if it helps. If the issue still persists, we would suggest you to get in touch with
M-track Support for further assistance.

Regard,

 

M-Audio M-Track 2x2 Not Recognized by my computer.

Hi,



Thank you for writing to Microsoft Community Forums.



We appreciate the research and troubleshooting you have done, this issue could be from the software end or from the hardware itself.



Please try few of the troubleshooting below to further eliminate the root cause of the issue.

1. Try to connect the device with a different USB and check if that helps.
   
2. Connect the M-track to different computer and check if you still face the issue there, if the issue persists, it could be caused by hardware.
   

Method 1:

1. Press Windows + R key on your keyboard together, and type
   control printers.
   
2. You will see list of all the devices and printers connected to your computer.
   
3. Click on Add a device and follow the onscreen instruction and add your device.
   

Method 2:

1. Uninstall
   all the M-Track drivers from device manager.
   
2. Reboot the computer and check.
   

Method 3:



I suggest you login to the manufacturer site,
download the drivers for your registered device and
install it.



If you still face the issue, I suggest you to get in touch with the
manufacturer and get the hardware checked once.



Hope it helps.

Amit Sunar

Microsoft Community – Moderator

 

M-Audio M-Track 2x2 Not Recognized by my computer.

My M-Audio M-Track 2x2 audio interface worked perfectly fine and I never had any problems with it. Today suddenly out of nowhere while I was gone from my room for one hour with my computer still on something must've happened on it's own and now it's not
being recognized at all. All the latest drivers are installed but when i plug in my interface it does not come up on the computer. The interface comes on and is receiving power. If i touch my mic, the green bars are active, so the interface is working. However
in the 'sound' settings in control panel it does not appear, even if i select display disconnected or disabled devices. I also did a ''system recovery'', where many of my apps have been deleted, just because I read online that maybe while I was gone I might've
had an update that corrupted something, but it's still not being recognized. Can anyone please help me?