Windows 10: Macrium issue or system issue

Hello,Today before making a new full bakcup image (with Macrium), I ran a defrag on disk C, then ran sfc scan, everything was OK.Started Macrium to make a full image backup of the system.The process stopped, it could not read something from the disk.So I ran a disk scan from C/properties/tools. Actually I got a note that disk is OK and do not deed to run the scan, but I set it to run. It finished successful.Started again Macrium to run the backup, some seconds later got a red note - please see attached screenshot,the process continued and finished successfuly. Ran the Verify backup, also successful.Never had such issue since using Macrium.What does this mean ? Searched for some Macrium log file dated to day, what I found is also attached here.Answers will be much appreciated.ThanksPS, Before all the above I also updated graphics card driver.Windows 10 pro 19042.985 x64

:)

 

Optical Drive Issue

Hello Anak –

Appreciate your detailed return. Your added steps really helped.

Assuming I did the steps correctly, this is where I am now.

Screenshot 12 shows my CD Disc shortcut on my desktop.
Screenshot 10 shows the CD Drive shortcut listed in the “Send to” listing.
Screenshot 11 shows the “Send to” listing after the steps were taken, but the CD drive name is not listed.

So, it appears the steps did not work for me. And, I did try the steps, “If it still won’t do ……” and still no luck.

What do you think?

JerryA

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

QUAD SLI GTX590 issues/question

Just to point this out as someone who was planning on getting a Quad-SLI setup, that PSU could potentially be a problem for Quad-SLI as all of the PSU's listed by Nvidia for use in that setup are 1100-1500w and if your system isn't able to draw enough power to run both of the cards at full throttle that would cause a significant bottleneck as well as that of the processor.

Step 1: Overclock that processor as much as possible.
Step 2: If performance is not where you want it after Step 1 look into a potential PSU issue.
Step 3: If your power supply is not the issue perhaps look into downgrading your cards to something like SLI GTX 580's 3 GB extreme edition or Crossfire 6970 Lightning editions since either of those cards have significant overclocking potential and would likely scale better in SLI/CF than a Quad-SLI setup.


Nvidia's Quad-SLI guidelines not exceptionally helpful but you never know:
http://www.geforce.com/Optimize/Guides/how-to-build-a-quad-sli-system