Windows 10: Major problems - startup and running W10

Hope someone will help out an oldie 79 - My original PC had an Asus m/b, W7, with 4GB RAM, then upgraded to W10, fully cared for with current AV and system cleaning. 500GB SATA hdd has >300GB spare space. Recent weeks, it was running slower and slower - minutes to boot up. Upgraded RAM, replacing 2 x 2GB to 2 x 4GB matched, specs as per ASUS m/b spec Didn't work despite several tries. Subsequently, PC failed to start at all, totally dead, saved the HDD, junked the rest.Acquired an old DELL desktop case with m/b, no hdd, originally had 4 GB but is now 8 GB RAM. Installed my old PC

:)

 

Can't get GPU-Z to start with Windows 8.1 startup

I'm not sure how to do that. Could you list the steps for a noob?

 

windows 10 startup problem

Hi,

Thank you for posting your query in Microsoft Community.

I understand your concern, and we in Community will try to help you in the best possible way we can.

I suggest you to check if there are any pending Updates.

Kindly perform clean boot to avoid any third party software conflict and check the status.

Putting your system in Clean Boot state helps in identifying if any third party applications or startup items are causing the issue. You need to follow the below steps to perform a Clean Boot.

Check in “clean boot” state, to check if any third party application is causing the issue. Follow these steps to start the computer in clean boot.

Step A:

a) Press the ‘Windows + R’ key on the keyboard.

b) In the ‘Run’ windows type
’MSCONFIG’ and click ‘Ok’.

c) Click the ‘Boot’ tab and uncheck
‘Safe Boot’ option.

d) On the ‘General’ tab, click to select the option
‘Selective startup’, and then click to clear the option
Load startup items check box.

e) On the ‘Services’ tab, click to select the
‘Hide all Microsoft services’ check box, and then click
‘Disable all’.

f) On the ‘Startup’ tab, click ‘Open Task Manager’.
In the Task Manager window under startup tab,
right click on each startup item which are enabled and select ‘Disable’.

g) Click ‘OK’, and then click Restart.



Step B: Enable half of the services

a) Follow steps 1a and 1b to start the System Configuration utility.

b) Click the Services tab, and then click to select the
Hide all Microsoft services check box.

c) Click to select half of the check boxes in the
Service list.

d) Click OK, and then click
Restart.



Step C: Determine whether the problem returns.



If the problem still occurs, repeat step 1 and step 2. In step 2, click to clear half of the check boxes that you originally selected in the
Service list.

If the problem does not occur, repeat step 1 and step 2. In step 2, select only half of the remaining check boxes that are cleared in the
Service list. Repeat these steps until you have selected all the check boxes.

If only one service is selected in the Service list, and you still experience the problem, the selected service causes the problem. Go to step 6. If no service causes this problem, go to
Step 4.

Step D: Enable half of the Startup items:

If no startup item causes this problem, a Microsoft service most likely causes the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the
Hide all Microsoft services check box in either step.



Step E: Determine whether the problem returns:




If the problem still occurs, repeat step 1 and step 4. In step 4, click to clear half of the check boxes that you originally selected in the
Startup Item list.

If the problem does not occur, repeat step 1 and step 4. In step 4, select only half of the remaining check boxes that are cleared in the
Startup Item list. Repeat these steps until you have selected all the check boxes.

If only one startup item is selected in the
Startup Item list, and you still experience the problem, the startup item that is selected in the list is the service that is causing the problem. Go to step 6.

If no startup item causes this problem, a Microsoft service most likely causes the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the
Hide all Microsoft services check box in either step.



Step F: Resolve the problem:

After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run the System Configuration utility, and then click
to clear the check box for the problem item.



Step G: Reset the system to Normal startup mode:

Note: After you have finished troubleshooting, follow these steps to boot to normal startup.

a) Press the ‘Windows + R’ key on the keyboard.

b) In the ‘Run’ windows type
MSCONFIG and click ‘Ok’.

c) On the ‘General’ tab, click the
‘Normal Startup’ option, and then click ‘OK’.

d) When you are prompted to restart the computer, click
‘Restart’.



Hope the information helps, if you have any further queries, feel free to post. We are here to assist you.

Regards,

Guru Kiran

 

W10 Startup list

Is there a list somewhere that I can access to check what startup programs I can stop from starting?
Running W10 and this is on a business computer that is slow to boot.