Windows 10: many BSOD screens and no mindump files

Hello I am experiencing a lot of BSOD blue screens since I installed vaskey 256GB SSD the errors are : 1 - critical process died 2 - unexpected store exception3 - kmod exception not handledI reinstalled windows and the same issue still appearsI tried :1-Update drivers using: windows update , driver pack solution , snappy drivers on each I reinstalled windows and the same issue keeps persisting2- ram checkI used windows memory diagnostic tool and make an extended scan and there is no issues3- hard disk scanI have run chkdsk on the new ssd because I have doubts that the problem is from it but

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

BAD_POOL_HEADER BSOD, Dump File attached


Hi Groggubus,

Welcome to the 10forums

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Please follow this suggestion for the BSOD

1. Please open BitDefender and go to the modules,
2. Go to the firewall settings,
3. Uncheck 'Block port scans in the network',
4. Reboot your system <-- IMPORTANT

 

Blue Screen Problems

How long did you let memtest run for? I would let it run overnight. Did you try running something like Intel Burn Test? It sounds like you took the steps I would suggest. I had that same motherboard (and E8400) and when I had that BSOD it was always memory related.