Windows 10: MBR bootable usb in UEFI!

Hi my name is Ahmed Malick,A moment ago I changed from Legacy mode to UEFI mode so I've Windows 10 bootable MBR USB, will it work on UEFI or need to convert USB to GPT?

:)

 

UEFI bootable usb on a MBR disk (Windows 10)

Your computer has UEFI firmware so you can enable CSM (BIOS support) in firmware. This varies from computer to computer so no detailed steps can be given.

Your UEFI bootable USB can be booted also using BIOS (if it was made the standard way - check if you have a \boot folder and bootmgr in root folder on USB).

On booting USB (after CSM enabled) select boot option for USB without UEFI.

Another way to go is restructure disk from MBR to GPT style. If you go this way - BACKUP YOUR USER FILES FIRST! (if possible make complete backup)

 

Install Windows 10 using UEFI bootable USB thumb drive

You need to go into you system bios and select allow uefi usb drive. Then add the UEFI usb drive to the boot menu

better way to partition aand create an bootable usb.

For the UEFI system, we can use these steps to create the bootable USB:

1.Locate a 4GB or larger USB flash drive

2.Open Diskpart and run the following command cmd admin type diskpart

• Type DiskPart in the command prompt.
• Type "List Disk” (make note of the disk number of the target USB drive).
• Type "Select Disk X”, where X is the target USB drive noted in step 4.
• Type "Clean”.
• Type "Create Partition Primary”.
• Type "format FS=fat32 quick”.
• Type "Active”.
• Type "Assign".
• Type "Exit".

Copy your ISO files to the drive and reboot

never use UEFI it better to repartition and remove UEFI go with legacy bois

 

Multi-bootable USB

Hey guys from TPU, couldn't find any specific thread pertaining to the question asked on title. As mentioned, I'm trying to create a bootable USB, but with many specifics boots available.

I've been trying to create one with multiple boot device including one that enables me to run Windows 10 directly on the USB Thumb Drive but to no avail.

The list of bootable images i'm trying to create are

1. Windows 10 (A full OS running from thumb drive)
2. Windows 10 ISO (Bootable disk image for fresh install)
3. MemTest86+

Have tried YUMI or UUI from the website USB PenDrive Linux but as this is my first time, i don't know how am i screwing up or am doing it right.. Anyone got a rough idea on a step by step guide? Thanks!