Windows 10: Memory Mangement BSODs

Hi Im currently getting BSODs with a memory management stop code.Some background - last week i replace my RAM because I was consistently getting BSODs but the stop codes were all different, most pointing to memory and driver issues. I performed a clean install of drivers. Installed the suggested stable driver of Nvidia the December 2024 driver. Unplugged my 3rd monitor just in case it was causing it. When I was doing the memtest86 test I found that one of my RAM sticks was causing consistent errors that the other RAM stick does not and 2 old ram sticks does not as well. So i figured the RAM st

:)

 

BSOD - Memory Mangement

Hi samerexe,

I am Dave, I will help you with this.

Your minidump files just indicate memory (RAM) corruption no specific driver is listed

1

Was that a one-time BSOD?

if ti was, Windows was probably updating drivers in the background and that caused a temporary incompatibility and there is nothing further you need to do.

2

If this BSOD's are a recurring problem.

Go to the support page for your H310M S2H Motherboard on the manufacturers website, then from there, download and install the version of Chipset drivers they recommend and while there, check for any BIOS update that may need to be installed, your BIOS date is 2018

Boot into BIOS, if there is an XMP profile set on your RAM, disable that, set it to default.

Wait to see if your system stabilizes, if not, the best option is to download the widely available free utility MemTest86, then run a full 4 pass scan with that to test your RAM for physical errors

 

BSOD - Memory Mangement

Hello

I get a BSOD message

memory management

I got the BSOD without an stop code just blue screen and memory management

How can i fix it?

minidump can be found here

File folder on MEGA

 

IRQ memory BSODS, device manager, memory range?

The only time I've seen that type of BSOD for myself is when I fried the PCI-e slots on my Striker 2 board... There wasn't anything that I could do, try and rma and go on.. I would suggest the steps that MilkyWay has said.. But, if you really don't know much about Bios's... I wouldn't play with Irq's... That can mess up everything on your board. USB, ethernet, ram, chip... But, that's just me on playing with irq's... To much of a hassle IMHO..