Windows 10: Message received: network discovery turned off

I am the sole user of a single pc, not connected to other pcs. Connected to printer and smart Tv. My pc turned itself on during the night, displayed this message: "Network discovery is turned off. Network computers and devices are not visible. Click to change in Network and Sharing center."

Pc, printer, TV are all working fine. How to handle message?

2 cumulative updates were automatically installed yesterday

:)

 

Cannot keep Network Discovery Enabled.

Hi,

Thank you for the response.

I would suggest that you change the settings in the Firewall to allow Network discovery so that the Firewall stays On while allowing the Network discovery to be enabled.

Follow the steps.

a . Open Control panel.

b. Small icons from the drop down.

c. Click on Windows Firewall.

d. Click on Allow programs or feature through Firewall.

e. Scroll the list and check Network Discovery.

If you need additional assistance then let us know.

 

Network Discovery Spotty

Hello,



For each of the machines experiencing this behavior, will you please perform the following:

• 
  Ensure Network Discovery is enabled.
  
  • 
    Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings
    
    • 
      For each Network Category (Public, Private, Domain) you wish to have the feature enabled, click the arrow to the right of the category to expand it, and select “Turn on network discovery” & check “Turn on automatic setup of network
      connected devices”
      
• 
  Ensure that Network Discovery is allowed inbound in the Windows Firewall (in addition to any other firewall in use).
  
  • 
    [Windows Key + R] > Firewall.cpl
    
    • 
      Click “Allow an app or feature through Windows Firewall” in the left pane.
      
    • 
      In the Allowed apps and features scroll box, find “Network Discovery”.
      
    • 
      Make sure it is checked for all of the Network categories that you have enabled.
      
• 
  Ensure the necessary services are started.
  
  • 
    [Windows Key + R] > Services.msc
    
    • 
      Base Filtering Engine
      (BFE)
      
    • 
      Computer Browser
      (Browser)
      
    • 
      DHCP Client
      (DHCP)
      
    • 
      DNS Client
      (DNSCache)
      
    • 
      Network Connection
      (NetMan)
      
    • 
      Network Location Awareness (NLASvc)
      
    • 
      Remote Procedure Call (RPC) (RPCSS)
      
    • 
      Server
      (LANManServer)
      
    • 
      SSDP Discovery
      (SSDPSrv)
      
    • 
      TCP/IP NetBIOS Helper
      (LMHosts)
      
    • 
      Workstation
      (LANManWorkstation)
      
• 
  Ensure the network interface that is connected to the network you want devices discovered is in the appropriate network category.
  
  • 
    [Windows Key + R] > Cmd.exe
    
    • 
      Type “PowerShell.exe Get-NetConnectionProfile”
      

In this output you will find Network Category, which needs to correspond to the category enabled through the firewall, as well as when Network Discovery is turned on.

• • • • • 
          For machines with multiple interfaces, you will need to know the name of the interface which is connected to the network with the devices you wish to be discovered
          
• 
  Ensure your Network bindings are correct.
  
  • 
    [Windows + R] > NCPA.cpl
    
    • 
      Right click the interface and select Properties
      
    • 
      Ensure the bindings are bound
      
      • 
        Client for Microsoft Networks
        
      • 
        File and Printer Sharing for Microsoft Networks
        
      • 
        Link-Layer Topology Discovery Mapper I/O Driver
        
      • 
        Link-Layer Topology Discovery Responder
        
      • 
        Microsoft LLDP Protocol Driver
        
      • 
        Internet Protocol Version 4 (TCP/IPv4)
        
      • 
        Internet Protocol Version 6 (TCP/IPv6)
        
    • 
      If any of these are unbound, try rebinding, and if that still doesn’t work, from an elevated command prompt, run
      “NetCfg.exe –d”
      

Hope this helps

 

Network Sharing and discovery issue windows 10 home 1909

1. Make sure that the following dependency services are started:
   • DNS Client
   • Function Discovery Resource Publication
   • SSDP Discovery
   • UPnP Device Host
     
2. Configure the Windows firewall to allow Network Discovery. To do this, follow these steps:
   1. Open Control Panel, click System and Security, and then click Windows Firewall.
   2. In the left pane, click Allow an app or feature through Windows Firewall if you are running Windows Server 2012. Or, click Allow a program or feature through Windows Firewall if you are running Windows Server 2008 or Windows Server
      2008 R2.
   3. Click Change settings. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
   4. Select Network discovery, and then click OK.
3. Configure other firewalls in the network to allow Network Discovery.
4. Turn on Network Discovery in Network and Sharing Center.