Windows 10: Microphone being used as an audio output i think

Just bought a new mic WVNGR WG-300II for relatively cheap, and it's either not being recognized at all on my device or being recognized as an audio output Windows 10 Pro, old Lenovo Thinkpad My reasoning being whenever I plug in my mic to the audio jack on the side, it keeps on using the computer's mic and uses the mic as an audio output so nothing is heard, because the mic has no speaker . I've tried using an audio splitter on it Vention 3.5mm to 2*3.5mm Stereo Splitter Cable which was also quite cheap, and unlabeled so I can't tell if I'm even using the correct input or not. I'

:)

 

Photos app not working when trying to start using a microphone

Hi Kad,

Welcome to Microsoft Community and we appreciate your interest in Windows 10.

I will definitely assist you.

It would be grateful if you could provide us few questions answer to understand the issue better and to provide you better assistance.

• 
  What is the make and model of the computer?
  
• 
  Are you using microphone headset or in-built microphone which came with the computer?
  

Let’s try simple steps and check if this help in resolving the issue. Follow the below steps.

Step 1.

I would suggest you to run Recording audio troubleshooter and check if it helps.

• 
  Type troubleshoot on the Window search bar and select
  troubleshooting.
  
• 
  Click on view all and click on
  Recording Audio.
  
• 
  Click on Advanced on the Recording Audio troubleshooter dialog box and click on Run as administrator (Enter the credentials if required).
  
• Click on Next and follow onscreen instruction complete the Recording Audio troubleshooter.

If the issue still persist, try the below step:

Step 2.

I would suggest you to update the sound driver from Device Manager manually and check if this helps. Follow the below steps:

• 
  Press (Windows key + X) and click on “Device Manager”.
  
• 
  Expand “Audio inputs and outputs”.
  
• 
  Right click on the audio driver device and select
  update.
  
• 
  Once update is done, restart the computer.
  

Hope this helps. Post us with the status we will be glad to help you.

 

Audio output leaking into microphone

I have a similar issue with my Turtle Beach Earforce X12 headset and after doing some research, I can say one thing.

It's probably your headset(s).

With that said, I encourage you to watch this brief gif:



In it, I play some audio in the background through my aforementioned Turtle Beach headset. Note how the input sensitivity is up near the middle of the bar. Around halfway through, I unplug my headset's output (leaving the mic plugged in) and switch it for a different pair of headphones. Notice how Discord is no longer picking up erroneous input. I should note that the mic is muted on the headset through this entire video, so this output bleed has to be coming from inside the headset (or Discord, but I am not in a position to judge).

My suggestion, is to see if you can use a different pair of headphones for your audio output and either get a budget external microphone or use your existing headset as a microphone only. Doing the latter is easy if your headset has two 3.5mm jacks so you can plug in the microphone jack but not the listen/audio output jack.

If neither of those options are convenient you can try setting Discord's input sensitivity above the typical peak amount when you're listening to loud music in the background, so at least it won't trigger automatically on your music alone. You may also consider push-to-talk. Lastly, you could also turn down the background audio when chatting on Discord anyway, but I realize that isn't a solution.

Also, as some of the comments have pointed out, it's worth checking if you have everything in the correct jack and that everything is setup properly software-wise, including in Windows and for your audio driver.

If you need any clarification, let me know, but I hope this helps.

 

no audio output device installed

I've tried every step that was suggested, still getting no audio output device installed.