Windows 10: Microphone level remember problem

Micrphone: GOOD GAME GG-R04Windows: Windows 10 21H2 build 19044.1889 installed on 22.‎6.‎2022.Hardware IDs value:USB\VID_4C4A&PID_4155&REV_0100&MI_00 USB\VID_4C4A&PID_4155&MI_00 Problem: First picture. I go in there and adjust the microphone volume to about 42% and it works as long as at least this one window the first "1A" is open. But when I close it by clicking "OK", the microphone volume that some other application registers is 100%.I go back to picture number 1 again, I look at the volume, it stands at 42%, but the programs and games think it is 100%.I just need to mov

:)

 

Headphones' Microphone Volume Under the "Levels" Tab Disappeared

We suggest that you check the following steps on how to raise the mic volume:

• Check the Speaker icon on the system tray. Right click on it and choose "Recording Devices" menu.
  
• This will show Sound window. Go to Recording tab of Sound window, you will notice the microphone which is active that has a green check mark. Right click on the active microphone and select "Properties".
  
• You will now see Microphone Properties window. Go to the
  Levels tab and you will now see Microphone and
  Microphone Boost. You can use the sliders to modify your volume settings. Click
  OK button to save changes.

Let us know how it works so we can further assist you.

 

Problems with windows 10, and the Razer Tiamat 7.1 Microphone.

Hi Andreiark,

I realize the inconvenience caused to you regarding the microphone. And I will certainly assist you.

Please answer the below questions to asisit you better.

1. Did you make any changes in the microphone settings prior to this issue?

2. Are you getting any error message or error code?

I would suggest you to plug the same microphone to some other computer and check if it is still in a working condition.
If it works fine in other computer then plug it to a different microphone jack and then follow the steps given below.

Method 1: Run the Audio Troubleshooter on the system

Windows 10 has a built-in troubleshooter to check and fix issues with Sound. I would suggest you to run this troubleshooter to check if the issue is with your Audio

Refer these steps:

• Press Windows key +X, select Control panel.
• Change the view by option on the top right to Large icons.
• Click on troubleshooting and click on the view all option on the left panel
• Run the playing Audio troubleshooter

Method 2 : Change the levels of the microphone and check if the issue persists.

• Right click on volume control and choose Recording devices.
• Choose your microphone, click properties.
  
• You will have a Levels tab, where you can adjust the input level of the microphone to increase the sound level.

Hope this helps regarding the microphone sound. Please do let us know if you need further assistance, we’ll be glad to assist you.

 

microphon

Hi Hassan,

Thanks for posting your query on Microsoft Community.

If a mic connected to this computer isn’t working properly then it’s likely a settings problem.

I suggest you to follow the below steps and check if it helps.

• 
  Right-click on the speaker icon in the bottom-right part of the screen.
  
• 
  Click on ‘Recording Devices‘.
  
• 
  A list of recording devices will appear. Try speaking into your microphone, and see if there any
  green bars rising next to one of them while you talk.
  
• 
  If you don’t see any green bars skip to step 5.
  
• 
  Check if you can recognize which one of the devices in the list is your
  microphone. If you found it, click on it to highlight it, and then click
  Set Default.
  
• 
  Check again if you see green bars rising when you talk into the microphone. If you do your mic is now correctly setup. If not, continue to next step.
  
• 
  Double-click on the device that represents your microphone. The
  Microphone Properties window will appear. Click the Levels tab.
  
• 
  In the levels tab, drag the slider all the way to the right, until the number on the right says “100“.
  
• 
  Click OK and check if it helps.
  

Hope it helps, reply to us with the status of your issue. We will be happy to assist you.