Windows 10: Microsoft Teredo Not Installed

I recently purchased a game that I wish to play online that requires teredo but I have been unable to connect. I have already tried the easy fixes: enabling xbox live online settings, using the netsh interface command in command prompt, using the "Fix It" in settings for NAT connectivity. I have also tried updating my drivers, changing my router settings and reinstalling teredo. Only thing is when I go to add Teredo in "Add Legacy Hardware" it does not appear. It is not already installed I've clicked show hidden devices and all forums and websites I've visited offer no help to this specific problem. I'm not sure what I am missing here, but I have done everything I myself am capable of to try and solve this issue to no avail.

:)

 

Microsoft Teredo Tunneling Adapter not Found

Hi,

It started off from teredo unable to qualify for Xbox connection.

Then, I tried following tons of suggestions through showing hidden drivers in Device manager, changing DisabledComponents value to 0.

However, I still cannot find Microsoft Teredo Tunneling Adapter.

I tried to install it by adding legacy hardware with all ways, but there was no Microsoft Teredo Tunneling Adapter in the list of the Microsoft Network Adapter .

 

Missing Microsoft Teredo Tunneling Adapter from Legacy Hardware

Hello,

Please try these suggestions:

Method 1:

Step 1: Modify TCPIPv6 Parameters through Windows Registry

1. Press “Windows” + “R” keys to load the Run dialog box.Type “regedit” and press Enter.
2. Inside Windows Registry, navigate (from the left pane) and highlight this key.
3. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters
4. At the right pane, double-click to modify the DisabledComponents key.
5. Set the DisabledComponents Value data to 0 (Zero) and select OK.
6. Close Registry Editor.
7. Restart your computer.
8. Navigate to device management.
9. Check if the Teredo tunneling adapter exists and working in device manager. To do that:

• From the View menu choose Show hidden devices.
• If the device manager's screen doesn't show any errors (and is without an exclamation mark) next to MS Teredo Tunneling Adapter then your problem is solved and the Teredo tunneling should work without problems.

If you face a screen with a yellow exclamation mark next to Microsoft Teredo Tunneling adapter.

Step 2: Uninstall all Teredo Tunneling Adapters & Interfaces.

1. Right-Click and Uninstall the Teredo Tunneling Pseudo-Interface.
2. Uninstall also all Microsoft Teredo Tunneling Adapters (e.g. Microsoft Teredo Tunneling Adapter #2 or #3 or #4, etc.)
3. Re-install Microsoft Teredo Tunneling Adapter by following the steps from this tutorial: How to install Microsoft Teredo Tunneling Adapter
4. If after re-installing teredo tunneling, you still have problems then proceed to Step 3.

Step 3. Enable Teredo Client using NETSH command

1. Right click at Command Prompt and select Run as Administrator.
2. At command prompt window type the following commands in this order and press Enter after typing each one of them.

netsh

int teredo

set state disabled

int ipv6

set teredo client

3. Close command prompt.

4. Open Device manager.

5. Select View > Show Hidden Devices. The Teredo Tunneling Pseudo Interface reappears and should be working without problems now.

Method 2 (not work in Windows 10 Home):

Open Group Policy Editor by running gpedit.msc command. Under Computer Configuration in the tree view, expand Administrative Templates then click All Settings. Look for "Set Teredo State", then double-click that. You will then enable the
policy and set the state below to "Enterprise Client" from what it was before in the dropdown menu under "Select from the following states".

Hope this helps!

References:

1. https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/how-to-install-teredo-tunneling-pseudo-interface/62790531-c342-4c5b-b367-542784ae768f

2. Teredo Tunneling Adapter Is Missing

 

No Teredo installed

Hi Jay,

Thank you for writing to Microsoft Community Forums.

Before we proceed, could you please confirm a few things for me?

1. The make and model of your system?
   
2. The Windows 10 Build you are using?
   

Systems communicate with one another using a certain predefined set of protocols, when systems within a network are using different protocols but are trying to communicate with one another it may require a translator to enable
this communication. This is where the Teredo Tunneling comes in. It facilitates the connectivity between devices behind routers that use network address translation (NAT) and thus enable this communication.

Given that you have already tried to enable the Teredo through the device manager and the netsh command through the command prompt, we have a few more steps that we could try to resolve this issue.

Check and make sure that no VPN client is blocking the Teredo connectivity.

Steps:

Manually enable the Teredo through the registry.

Disclaimer: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these
steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.

To take a backup or restore the registry click
here.

Check the iphlpsvc registry path:

1. Right-click the Start icon, type in cmd, Right-click on it and 'Run as administrator'.
   
2. Run the following command from the Admin command prompt: reg query HKLM\System\CurrentControlSet\Services\iphlpsvc\Teredo
   
3. If you find this output: Type REG_DWORD 0x4
   
   You will need to Re-enable Teredo by running the following command from the Admin command prompt: netsh interface Teredo set state type=default
   

Check the TcpIp6 registry path:

1. Right-click the Start icon, type in cmd, Right-click on it and 'Run as administrator'.
   
2. Run the following command from the Admin command prompt: reg query HKLM\System\CurrentControlSet\Services\TcpIp6\Parameters
   
3. If you find the output, and the value displayed is not 0x0. Example: DisabledComponents REG_DWORD 0x8e
   
4. You will need to Re-enable Teredo by running the following command from the Admin command prompt: reg add HKLM\System\CurrentControlSet\Services\Tcpip6\Parameters /v DisabledComponents /t REG_DWORD /d 0x0
   

Hope it helps.

Aaron Summith

Microsoft Community - Moderator