Windows 10: Monitor Display Problem

In the last few days, there has been a problem with the display on our Samsung monitor. The image appears as if it has been scored horizontally and the colours are off as well, more like black and white rather than full colour. As well, the image is very distorted and unsteady to the bottom margin, almost to the point that the task bar is obliterated. Here are some observations:


1) It has been noticed that, when the screen resolution has been changed, the image is normal for five seconds max, then reverts to the abnormal image.


2) Have tried disabling and rolling back the display driver and this hasn't helped


3) Have tried both kinds of Windows Reset, to no avail.


any suggestions?

:)

 

No display on monitor when TV set as primary display

Issue solved

Removed DVI/HDMI cable from computer and monitor

Step 1: Check if the VGA monitor cable is defective.

1. Turn off computer
   
2. Connect the monitor VGA cable from the monitor to the VGA port on the computer
   
3. Turn on computer, VGA monitor cable is good.
   
   Step 2: Tun off computer
   

1. Connect HDMI Cable to HDMI port and TV
   
2. Turn on computer and TV, there is no monitor black screen
   
3. Click on the Windows logo, select the Settings icon , and then select
   
   System. Under Display there are two squares, labeled 1 and 2
   
   D Click on Advanced Display Settings:
   
   Display information: Display 1- Monitor Display 2 -TV
   
   E Right-click the Speakers icon in
   the taskbar, select Sound, click on Playback devices,
   
   
   a s tv screen with my brand shows
   AMD High Definition Audio Device ready.
   
   F. Problem solved
   
   
   
   Cause of the problem: Defective VGA port on the Syba VGA HD15+ 3.5 Audio to HDMI converter
   

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.

 

monitor display size

Hi Kathy,

This issue with monitor display can be caused by screen resolution problems.

As an initial troubleshooting step, try changing the screen resolution by following the steps below:

• Right-click on the desktop screen.
• Select Display settings.
• Click Display.
• Under Resolution, click on the drop-down menu and change the screen resolution.
  
  Note: You can select the most recommended resolution (1920 x 1080) if applicable and see if the issue will persist.

Let us know if you have any other concerns.