Windows 10: monitor display problems after latest update

After the latest update, when I open two windows of the same program, one on each monitor, for ease of working. Everything works well on monitor one, but monitor two sends all of the boxes that pop up within the program it sends to monitor one. NOTE: Before the update, it worked perfectly. Whatever I Opened within the program stayed on the same monitor. Now, it doesn't and also this is the only program it does it too.

:)

 

Installed Windows 10, monitor display problems

Hi,

Thanks for posting your query in Microsoft forum. I will certainly help you with this issue.

Monitors can support resolutions that are lower than their native resolutions, but text won't look as sharp and the display might be small, centered on the screen, edged with black, or stretched. It is recommended to set the screen resolution of the display
to the (Recommended) native resolution to get the best display on your monitor.

Methods 1:

Set your screen resolution needs to be at least1024x768 to have multiple windows and apps on your screen at the same time.

If this doesn't help update the display drivers.

Method 2: Update display adapter driver.

Step 1: Check for the latest driver update through Windows Updates.

• At the Start screen, type Windows Update.
• Click or tap Settings on the right side of the screen, and then select Install optional updates from the left results.
• When the Windows Update control panel opens, click on “Check for Updates” on the top left corner to receive a fresh list of updates.

Incompatible or not properly installed graphics card drivers are the most common cause of this issue.

Step 2: Follow the steps below to update the graphics/display drivers.

• Press Windows + X key on the keyboard.
• Go to device manager.
• Right-click your display device.
• Click Update Driver Software and then follow the steps in the wizard that appears.

For further assistance, you can post your query in Microsoft Community.

Thank you.

 

MS Office and Skype scaling issue with display monitors

Hi J,

The scaling issues with your display monitor can be caused by an outdated operating system. To further isolate the concern, we suggest that you check for the latest update for Windows by following these steps:

• Click on Start or the Windows Logo on your taskbar.
• Select Settings or the gear icon and click Updates & security.
• Click on Check for updates.

If any updates are found, install it and wait for Windows to complete the update and then restart the device.

Let us know the result of your troubleshooting.

 

No display on monitor when TV set as primary display

Issue solved

Removed DVI/HDMI cable from computer and monitor

Step 1: Check if the VGA monitor cable is defective.

1. Turn off computer
   
2. Connect the monitor VGA cable from the monitor to the VGA port on the computer
   
3. Turn on computer, VGA monitor cable is good.
   
   Step 2: Tun off computer
   

1. Connect HDMI Cable to HDMI port and TV
   
2. Turn on computer and TV, there is no monitor black screen
   
3. Click on the Windows logo, select the Settings icon , and then select
   
   System. Under Display there are two squares, labeled 1 and 2
   
   D Click on Advanced Display Settings:
   
   Display information: Display 1- Monitor Display 2 -TV
   
   E Right-click the Speakers icon in
   the taskbar, select Sound, click on Playback devices,
   
   
   a s tv screen with my brand shows
   AMD High Definition Audio Device ready.
   
   F. Problem solved
   
   
   
   Cause of the problem: Defective VGA port on the Syba VGA HD15+ 3.5 Audio to HDMI converter