Windows 10: Monitor display shifted to the right in windows 11 and a few problems please help

My monitor screen is shifted a bit to the left, i purchased a new computer recently which contains rx 6600 & Ryzen 5 3600, this monitor had vga so I used a vga to HDMI converter and used the device, what was happening when I turn on the computer a box comes up telling me that this is not a recommended resolution but the recommended resolution is 1366 x 768 but when I do that it shifts a bit left but it's ok when it's set to 1920 x 1080, but you know it kinda makes me feel concerned about that, so what to do to keep my device as 1366 x 768 but perfectly aligned and please note that I use wi

:)

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.

 

Installed Windows 10, monitor display problems

Hi,

Thanks for posting your query in Microsoft forum. I will certainly help you with this issue.

Monitors can support resolutions that are lower than their native resolutions, but text won't look as sharp and the display might be small, centered on the screen, edged with black, or stretched. It is recommended to set the screen resolution of the display
to the (Recommended) native resolution to get the best display on your monitor.

Methods 1:

Set your screen resolution needs to be at least1024x768 to have multiple windows and apps on your screen at the same time.

If this doesn't help update the display drivers.

Method 2: Update display adapter driver.

Step 1: Check for the latest driver update through Windows Updates.

• At the Start screen, type Windows Update.
• Click or tap Settings on the right side of the screen, and then select Install optional updates from the left results.
• When the Windows Update control panel opens, click on “Check for Updates” on the top left corner to receive a fresh list of updates.

Incompatible or not properly installed graphics card drivers are the most common cause of this issue.

Step 2: Follow the steps below to update the graphics/display drivers.

• Press Windows + X key on the keyboard.
• Go to device manager.
• Right-click your display device.
• Click Update Driver Software and then follow the steps in the wizard that appears.

For further assistance, you can post your query in Microsoft Community.

Thank you.

 

No display on monitor when TV set as primary display

Issue solved

Removed DVI/HDMI cable from computer and monitor

Step 1: Check if the VGA monitor cable is defective.

1. Turn off computer
   
2. Connect the monitor VGA cable from the monitor to the VGA port on the computer
   
3. Turn on computer, VGA monitor cable is good.
   
   Step 2: Tun off computer
   

1. Connect HDMI Cable to HDMI port and TV
   
2. Turn on computer and TV, there is no monitor black screen
   
3. Click on the Windows logo, select the Settings icon , and then select
   
   System. Under Display there are two squares, labeled 1 and 2
   
   D Click on Advanced Display Settings:
   
   Display information: Display 1- Monitor Display 2 -TV
   
   E Right-click the Speakers icon in
   the taskbar, select Sound, click on Playback devices,
   
   
   a s tv screen with my brand shows
   AMD High Definition Audio Device ready.
   
   F. Problem solved
   
   
   
   Cause of the problem: Defective VGA port on the Syba VGA HD15+ 3.5 Audio to HDMI converter