Windows 10: Monitor Is Black But Flashing The Display For Like 1 Millisecond, cant even change my power...

i seriously need help,

:)

 

No display on monitor when TV set as primary display

Issue solved

Removed DVI/HDMI cable from computer and monitor

Step 1: Check if the VGA monitor cable is defective.

1. Turn off computer
   
2. Connect the monitor VGA cable from the monitor to the VGA port on the computer
   
3. Turn on computer, VGA monitor cable is good.
   
   Step 2: Tun off computer
   

1. Connect HDMI Cable to HDMI port and TV
   
2. Turn on computer and TV, there is no monitor black screen
   
3. Click on the Windows logo, select the Settings icon , and then select
   
   System. Under Display there are two squares, labeled 1 and 2
   
   D Click on Advanced Display Settings:
   
   Display information: Display 1- Monitor Display 2 -TV
   
   E Right-click the Speakers icon in
   the taskbar, select Sound, click on Playback devices,
   
   
   a s tv screen with my brand shows
   AMD High Definition Audio Device ready.
   
   F. Problem solved
   
   
   
   Cause of the problem: Defective VGA port on the Syba VGA HD15+ 3.5 Audio to HDMI converter
   

 

Display goes black after 1 minute. Power and display settings were changed to 30 minutes.

I'm using Windows 10. My display goes black after 1 minute. Power and display settings were changed to 30 minutes with no affect.

 

Windows 10 External Monitor only :: How to set Portrait orientation?

Thanks Elise,

I surmise the need for step recorder is not common enough to justify enabling the option for Intel driver.

Screen Capture Mouse Cursor position on External Monitor is why I create this post.

When it cannot capture Mouse Position, I use Steps Recorder but it records both Displays...

My Screen Capture is used for following:

1. Power Automate Cloud
   
2. Office 365
   
3. communicate to Tech Support
   

Hoping Microsoft would add features to next version of

1. Step Recorder
   
2. Snip App(s)
   
3. Windows Display setting
   

Assuming most users like me need

1. Mouse cursor position captured by Snip App(s)
   
2. External monitor, when used, is often
   
   1. to extend Display
      
   2. used for important task(s)
      
   3. App such as Office is on External Display
      
   4. Laptop monitor for secondary task(s)
      
   5. Step Recorder is to demo use of Single App, therefore External Monitor
      
   6. Portrait oriented for capturing web pages like Power Automate
      

Kind Regards,