Windows 10: Monitor loses input and PC fans speed up whilst gaming

When ever I load a game, after some time all my monitors go black/no input, my pc fans goto a high speed and I can still hear game audio/voice call audio. I have tried win+ctrl+shift+b but that doesn't help PC SPECS b450m mortar max motherboard Ryzen 7 2700x RTX 2060 SUPER 32GB 2666 RAM Occured on 16GB of ram Seasonic 650w PSU 1x 250GB SSD 1x 512GB NVME SSD 2x 1tb HDD 5x 120mm Fans not rgbThings I have tried, but didn't change anything - New install of windows 11 - Added 16GB of ram -Cleaned PC -Updated Graphics Drivers -Tried Different storage combinations - Setting Link State Powe

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Monitor - No Input Signal

So you are suggesting that in the event this cable goes for a six, I try out the HDMI port? Seems quite a tenable suggestion - I never thought of that!

 

Windows 10 fan speeds

Like many others (I'm 100% sure) I have been looking for a fix for Windows 10 and fan speed problem. I have done all I can from updating my BIOs to updating my graphics cards you name, I've done it. Except my problem is a bit different. I had windows 10
working just fine on my pc before with the fan speeds working just fine. I had to roll back to 7 at the time because the game I was playing did not support windows 10. When they updated the game I went back to 10. This time I decided to do a clean install
because I figured will I had no problems the first time I had it right? Well I was wrong. Now the fan speed is at 100% no matter what, from start up till shut down the fan speed never drops below 100%, the system temperature is normal as monitored by speed
fan. I have about 9% process. I've also choose a power plan to make sure my PC is working so hard. This ONLY happened when I upgraded to 10. My system completely checks out more than compatible for windows 10. As I said I had it before with no fan speed problems.
Honestly, I think that this problem happens when people choose a clean install rather than upgrading from 7 or 8.1 not too sure as I have seen other topics about this same exact issue. When I went from 7 to 10 no problems but from a fresh install, I get the
fan problem. Also there is some driver issues I've found. Example I have a headset from logitech I had bought witch worked fine when I had 7 and even upgraded from 7 to 10. Then when I did the fresh install and plugged in the head set, it shows up under unknown
devices. No matter how much time I've spent on it t, the drivers wont install. I think when the drivers installed on 7 and I upgraded to 10, the drivers just were already there and compatible. I have read so many topics about this and no word on a fix that
will come out or any word that they see that this is a problem. On another note. I tested this on another computer going from 7 to 10 and no fan issues. Does anyone have any suggestions that will help?