Windows 10: Monitor Randomly Waking

I'm posting this as it may help others with a similar problem.I've been trying to find out why my monitor keeps randomly waking for years now!I've tried every possible suggestion but nothing has worked up until now.By chance I left the mouse resting on my table top rather than on the mouse mat. Problem solved!For the last few weeks, the monitor has reliably turned off after the timeout and stayed off. It was the mouse mat all along that's been the cause of this problem!Why is this happening? I'm wondering if anyone has seen anything like this before. I can't be the only one, surely?I'm using a

:)

 

Windows 10 randomly waking from hibernation

Hi,

I understand your concern and will assist you to resolve the issue.

I suggest you to follow the steps below and check if it helps.

Step 1: Stop the Network from Waking Your PC

a. Press Windows key + X and select
Device Manager.

b. In Device Manager, under
Network Adapter, Right click and select properties.

c. Go to the Power Management tab. uncheck the box that says: "allow computer to turn off this device to save power".

d. you'll find an “Allow this device to wake the computer” check box, which you should uncheck.

Step2: Run the
Power troubleshooter.

Windows 10 has a built-in troubleshooter to check and fix issues with power. I would suggest you to run this troubleshooter to check if the issue is with your Power.

Refer these steps:

• Press Windows key +X, select Control panel.
• Change the view by option on the top right to Large icons.
• Click on troubleshooting and click on the view all option on the left panel.
• Run the Power troubleshooter.

And also refer the link below and check if it helps.

http://answers.microsoft.com/en-us/...ibernate/247e69c3-cc7a-40db-b34e-43d8d60e6947

Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help

 

Third monitor randomly will not wake

Been having this issue ever since our office PCs were replaced with Windows 10 machines.

I have three monitors connected to a Quadro P4000 via DisplayPort cables. On occasion, my third monitor will not wake with the others when I wake up my PC in the morning. I have tried everything I am able to Google up on this issue and nothing seems to resolve
it. I feel like it's a Windows 10 issue because I never once had this problem on my old machine (which was a Windows 7 box), but it's not like the only thing that changed was Windows 10, of course.

Corporate IT has no idea what the problem is. All they can really do is update drivers and look at the issue and say hmm that's odd.

What I've done:

- Recabled using new cables

- Swapped monitors out with others

- Updated GPU drivers

- Wiped drivers clean and updated drivers

- Checked power plan settings

The only thing that fixes it is a reboot or two. Eventually the PC recognizes all three monitors and things are good until the next incident (usually every couple weeks on average). The largest inconvenience is that, while the setup is operating on 2 of
3 screens, the remaining 2 screens get shifted around, so I have to drag my mouse to the right of the middle one to reach the left side of the left one, e.g.

Right now I'm running two Lenovo P24Q-10s and one Lenovo T22i. Yes, they're mismatched. I previously was running two T22is and an older 22". The "odd one out" is always the one to fritz out in a mismatched setup. HOWEVER, I tried with three identical ones
and in that case, when a monitor decided to not wake, the choice would seemingly be random. At least with a mismatched set, I get consistency..! Although the mismatched monitors aren't ideal, evidence suggests the mismatch isn't causing the problem.

Anyone encountered something similar? Any further tips to try?

 

Monitor problem - not waking up

Hey guys, I have an issue with my BenQ GW2765HT where if I turn on my computer with the monitor in standby (orange light) status the monitor will not wake up. I must then unplug the monitor from the AC power and then replug it and then also restart my computer before the monitor will wake up. This issue is intermittent however and also strangely if I do a restart from Windows the monitor goes to standby for a second or two before waking back up when the POST screen appears which is normal behaviour. So it seems only if the screen is on standby for some time does it fail to wake up again.

Also the monitor will not wake up if it is powered off (although still plugged in) under the same circumstances as if it were just on standby status and also requires the AC power to be disconnected and the computer to be restarted before it wakes up.

Any suggestions? Or should I just take it back to my shop?

info; I bought it in the middle of August last year.
edit; I am using a displayport cable. I've tried a different displayport cable and also with a different computer and I have the same problem. I also tried DVI and it happened more often.