Windows 10: Monitor turns off and on with no display after upgrade.

Computer case - Focus G MiniMonitor - Optix G24C4 CPU - Intel Core i7-12700KFCPU Fan - Artic Alpine 17Storage- Silicon Power Ace A55 M.2Power Supply - Antec Gold 500wGraphics Card - AMD Radeon RX 6600 XTMotherboard - MSI MAG B660M MortarMemory Modules - XPG DDR4 8gb x 2I recently upgraded my motherboard and cpu and started to redownload windows for a reset. It started it and put got to entering my location and some basic intro things. Then my monitor turned black and is turning off and on with no display. I’ve restarted my computer multiple times and nothing changes. I can’t get into any

:)

 

No display on monitor when TV set as primary display

Issue solved

Removed DVI/HDMI cable from computer and monitor

Step 1: Check if the VGA monitor cable is defective.

1. Turn off computer
   
2. Connect the monitor VGA cable from the monitor to the VGA port on the computer
   
3. Turn on computer, VGA monitor cable is good.
   
   Step 2: Tun off computer
   

1. Connect HDMI Cable to HDMI port and TV
   
2. Turn on computer and TV, there is no monitor black screen
   
3. Click on the Windows logo, select the Settings icon , and then select
   
   System. Under Display there are two squares, labeled 1 and 2
   
   D Click on Advanced Display Settings:
   
   Display information: Display 1- Monitor Display 2 -TV
   
   E Right-click the Speakers icon in
   the taskbar, select Sound, click on Playback devices,
   
   
   a s tv screen with my brand shows
   AMD High Definition Audio Device ready.
   
   F. Problem solved
   
   
   
   Cause of the problem: Defective VGA port on the Syba VGA HD15+ 3.5 Audio to HDMI converter
   

 

Monitor wont display after monitor turned off

I recently build a new system and used an old monitor, no problems. I bought a new monitor and If I turn off my monitor and turn it back on it gives me no display and says no signal detected. I am forced to restart computer several times to get image back to the monitor. Once display is on there are no problems as long as I don't turn off the monitor again. I have read there is a bios update but when I go to Gigabyte page they are listed as F3, F13, F42 and F51. How can I determine which F version my card is?

Also I returned monitor and card with the same products thinking it was hardware issue but the problem remains. I have even reinstalled the OS.

MSI Z97 Gaming 7
4790k
Gigabyte gtx 970 G1 gaming
Gskill Ripjaws 2133 16gb
Monitor Benq 2765 2560x1440p IPS

 

Monitor wont display after monitor being turned off

I recently build a new system and used an old monitor, no problems. I bought a new monitor and If I turn off my monitor and turn it back on it gives me no display and says no signal detected. I am forced to restart computer several times to get image back to the monitor. Once display is on there are no problems as long as I don't turn off the monitor again. I have read there is a bios update but when I go to Gigabyte page they are listed as F3, F13, F42 and F51. How can I determine which F version my card is?

Also I returned monitor and card with the same products thinking it was hardware issue but the problem remains. I have even reinstalled the OS.

MSI Z97 Gaming 7
4790k
Gigabyte gtx 970 G1 gaming
Gskill Ripjaws 2133 16gb
Monitor Benq 2765 2560x1440p IPS