Windows 10: mountvol /N dont work

using windows 10, we want to disable auto mount of new USB deviceswe have tried 3 ways:MOUNTVOL /NDISKPART automount disabledchange register key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MountMgr\NoAutoMount = 1however none of them works. The new drive letter appear when connect a new USB disk. Even after restart windowswhat can be the problem?

:)

 

Windows 10 infinite restart black screen


The tutorials provided are just a list of troubleshooting steps. Use only the steps which apply to you.

Since none of the troubleshooting steps here worked, I'd suggest you do a Clean install.

John

 

atiflash dont work

hello i have a big problem i want to flash my ASUS ati Radeon x850 Pro vivo PCIE card becouse the 16 pipelines and the first step to flash the card with Flashrom is no problem but if i want to flash the Card back to the original bios with atiflash then it do not work (i think it dont accept the device 0) can anybody help me to get it work? (flashrom work with device 0 but atiflash not)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".