Windows 10: MSFS boot failed during update check step. Loading Problem

Hello! ----------------------------------------------------------------------------------------------------------------------------My system specs are: OC: Windows 11 Pro l 21H2 l 22000.2176Processor: Ryzen 5 3600 Video Card: RTX 3070 GameRock 8GB MotherBoard: Aorus Elite B550 V2 RAM: Aorus Memory RGB 3800Mhz 32GBHere is what I tried: - Reload "Net" resources via PowerShell - Reinstalling video card drivers, because the game was complaining that my drivers did not match the declared ones of the game 557.42. While the maximum version of my available driver from the Nvidia site is 536.40, the

:)

 

HD 5870 Bios flash failed

mp3 player is in FAT / FAT32 format ?

Set Boot up first to the drive with hiren bootcd 10.4
Done...

the options will pop out after loading the disc choose

boot cd

then the list (step by step)

Next...
Dos....
USB Drivers....
Load USB Drivers with no386.....

Ask you load cd drivers. NO
Ask you load SCSI drivers. NO
Ask you anything NO.
USB driver list comes out. 8 Don't choose anything else.

type
C:\ (that should be your mp3 player if you did it right)

atiflash -i
to list the adapters

atiflash -p -f 0 ???.bin

done.........

 

x800 GTO 16 pipe unlock step by step

Ok, there is a gigantic thread going on with this that has been extremely helpful. However, you have to search the entire thread to actually figure out what to do. So, I'm going to list step by step instructions right here for anyone who needs them.



Step 1: Download the attachment
Step 2: Follow the instructions about checking your fuses
Step 3: Dump your bios with ATItool (Settings -> Miscellaneous -> dump bios)
Step 4: Open your current BIOS with RaBit 1.7 or later and go to "Logging" section scroll down and search for:
Desc: RADEON X800 GTO
Info: 11X-CC6600SA-004, CC6600SA.004, 01/20/05,14:19:32
Step 5: If all checks out, simply burn the iso, boot from it, and flash!

Ultra special thanks to dolf for coming up with all this stuff and thanks to everyone else in the forum. This should simplify the process a bit!

 

Intel Gives Core i3 and Core i5 Dual-Core Processors K0 Stepping Update

Intel is giving some existing 32 nm "Clarkdale" based Core i3 and Core i5 processors an update. The processors will transition to the new K0 stepping from the existing C2 stepping. The parts that will be made on the K0 silicon are Core i3 models 530 (new sSPEC: SLBX7), 540 (new sSPEC: SLBTD) and Core i5 models 650 (new sSPEC: SLBTJ), 660/661 (SLBTK/SLBTB), 670 (SLBTL). Newer and upcoming models such as the i3-550, i3-560, i5-665K, and i5-680 are already being built on the K0 stepping die. Motherboards will require a BIOS update to support the new K0 stepping processors.

The K0 stepping change includes the following highlights:

• New S-spec and MM numbers for the converting products
• Extended CPUID will change from 0x00020652 to 0x00020655
• Host RevID will change from 0x12 to 0x18
• K0 stepping package is pin compatible with C2 stepping package
• Adds Processor Context ID (PCID) support

The revised older SKUs that are built on K0 stepping will be market-available by October 16.