Windows 10: Multiple BSOD caused by bddci.sys

Hi! Recently I got myself a new laptop and after setting it up, I've started to consistently face BSOD, at least 2 times per day. Usually the error code is DRIVER_IRQL_NOT_LESS_OR_EQUAL and the file that causes the crash is bddci.sys. I've updated the system and all the drivers that I could find but still the error returned. I've also lurked on other forums for an answer and the most common advice was to uninstall BitDefender, which apparently this file is from, or to delete the bddci.sys. I didn't manage to do any of these things cause the file would be constantly open and I can't even locate

:)

 

QCAMAIN1.SYS CAUSING BSOD

This was probably caused by the following module:
qcamain1.sys (Qcamain10x64+0x108678)

Bugcheck code: 0x1D3 (0x333, 0x0, 0x0, 0x0)

Error: CUSTOM_ERROR

A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: qcamain1.sys .

Google query: qcamain1.sys CUSTOM_ERROR

Using WhoCrashed I found this thread: QCAMAIN1.SYS CAUSING BSOD (Code 37 Error) however without
solution, locked.

I did get BSOD almost everytime I moved the laptop.

This worked for me:

unscrew wifi module, push a little into the socket. Screw in. DONE

 

wdf01000.sys and ntoskrnl.exe BSOD

I'm on Windows 10, 64bit

Basically, whenever I try to update my LPC controller through Device Manager, BSOD with WDF_VIOLATION occurs (culprit being wdf01000.sys)

So I try to use the driver verifier to see which driver is causing the BSOD, but then it causes BSOD (cultprit being ntoskrnl.exe)

Have no idea which driver is causing them

Please help!

Here are my list of drivers and system info: Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

 

Multiple BSODS with different errors, caused by ntoskrnl.exe

Wow thats a lot of usual causes!

Just to clarify / remove some things of that list, as mentioned the RAM has passed memtest multiple times, none of my hardware is OC'd, BIOS is fully up to date.

As far as I'm aware this is because its the single ram speed, and with it being DDR its 800*2=1600, I could be mistaken though?

As for the slots basically I was having BSOD's whenever any module was installed in one of the channels, so I had to move both modules over to the other channel, and this seemed to fix it, however I can move them back around to see what happens.

As for the memory I could have sworn I saw it on the supported list a while ago, ill check with the vendor of my PC.

Thanks for all the help

So whats the next step?