Windows 10: Multiple BSOD stop codes

Hi team,I recently upgraded my PSU and GPU, but I get BSOD errors every 30 minutes to an hour with different stop codes. Firefox tabs also occasionally crash. I'm not 100% sure what the pattern is, but they tend to happen when the computer is idling or when I'm using the internet browser only. Before these BSODs started, I tried to install a GPU to a system with a PSU that has a lower wattage, which may have caused hardware or software damage. Here are the things I've tried so far:sfc /scannowchkdsk /x /r /f on all of my drivesmemtest HCI to 400% coverage on all 16gb of ramstarted Firefox in T

:)

 

BSOD when coming out of sleep, multiple error codes

Thanks for the assistance, I've run all the necessary steps. It looks like there might be an issue found when running that first command. I have also installed all the driver updates recommended by the dell support check.

You can find the logs of the command prompt window in the cmd.log file

cmd logs.txt

 

BSOD death, multiple stop codes

Good day,

I have been assisting a user with an issue relating to BSOD, and multiple stop codes ranging from:

KERNEL SECURITY CHECK FAILURE

SYSTEM SERVICE EXCEPTION

DRIVER VERIFIER DETECTED VIOLATION

I ran through a couple of troubleshooting steps, such as an SFC scan and DISM restorehealth among other things, and it seems the stop codes now mainly focus around driver related issues from what I can gather.

I did advise the user that the PC needs to have it's OS reloaded, however due to the Covid-19 lockdown options are limited.

Would anyone be able to assist? I am aware that generally the Minidump file(s) are required, which I will try and upload as soon as I am on the PC.

Some troubleshooting steps I have followed:

- Checked that PC had updated to Windows feature pack 1909.

- SFC scan - No integrity violations.

- Uninstalled and re-installed graphics driver as it was stated that this driver is the root cause of some of the stop codes.

- Driver check for any outdated drivers (Dell support assistant) - No drivers of importance needing an update

- Memory check - No issues with Memory detected.

- Ran CCleaner. - Ran Malwarebytes - No infections. - Ran Rkill - Ran ADWCleaner - Removed adware. - Ran Crystaldiskinfo - Good drive status shown.- Ran the DISM command - Completed Successfully.-
Checked PC resources, no irregularities or high usage detected.

 

Multiple BSOD Codes

3 memory dumps in the uploaded reports. 3 different BSOD error codes (STOP 0x12B; 0x154, 0x1A). All blame memory corruption as the cause.

This, combined with your description of BSOD's w/different error codes is suggestive of a hardware problem.
As such, please start with these free hardware diagnostics:
- MemTest86 (NOT 86+): MemTest86 - Official Site of the x86 Memory Testing Tool
- Seagate Seatools for Windows (run the long/extended test on ALL drives): SeaTools for Windows |
Seagate

Post back with the results and we'll move on from there.