Windows 10: Multiple BSOD Win 11

I know that BSODs are common and have been addressed in multiple places in this forum. But trust me, I need some real help because I feel like I have tried everything. I am getting multiple BSODs: IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe failskmode_exception_not_handledHypervisor Error I have clean installed windows multiple times. I have also formatted my laptop. I downgraded to win 10 but the BSOD did not stop. I upgraded to win 11, and the issue still persisted. Finally, I thought that it was a hardware issue, so I cleaned my laptop's fans and heatsync. I also redid the thermal paste and rep

:)

 

Multiple BSODs after Windows 11 Installation

After installing Windows 11, I get multiple BSODs each time it tries to boots (logo phase).

I have Windows 10 alongside with it, it is working without any problem.

I installed it bypassing TPM and Secure boot because my PC doesn't support it, since it's an old laptop.

Specifications:

• Asus ROG G74SX
  
• CPU: i7-2670qm (8x2.2ghz)
  
• GPU: GTX 560M
  
• MEM: 2x8GB + 2x2GB DDR3 (1333MHz)
  
• SSD: Kingston 240GB
  
• HDD: Hitachi 700GB
  

So far, these are all the BSODs I tracked:

• SYSTEM THREAD EXCEPTION NOT HANDLED
  
• KERNEL MODE HEAP CORRUPTION
  
• IRQL_NOT_LESS_OR_EQUAL
  
• Kernel Security Check Failure
  
• FAT FILE SYSTEM
  

 

Windows 11 having multiple BSOD a day

I've noticed such a problem since 2 months ago. I've tried to replace my memory sticks. This is then followed by updating firmware and software. I tried to upgrade from Windows 10 to Windows 11 as well. My final step was to reinstall Windows 11. All the steps have been performed but the issue is still happening, in fact much more frequent than before. Below are the errors that I see while BSOD:

• WHEA Uncorrectable Error
  
• DRIVER_IRQL_NOT_LESS_OR_EQUAL
  

I've even run "sfc /scannow" and memory diagnostics, all return normal. I've no idea on what to do now. Hereby providing a .dmp file for your reference under my OneDrive. Link

 

Win 11 BSOD, multiple stop codes

Greetings,

I recently upgraded my PC from Windows 10 to Windows 11. The PC itself is about 5 years old but has been upgraded with new components including the following:

• Asus Rog Strix Z590-A MB
  
• Intel Core i7-10700K 3.8GHz LGA-1200
  
• Nvidia GeForce GTX 1050i (D5 4G)
  
• Creative Sound Blaster Audigy PCIe RX 7.1 Sound Card
  
• SATA 3.0 PCI-E card (6 SATA ports)
  

I also have done the following:

• Upgraded from Win 10 to Win 11
  
• Updated Nvidia Drivers for GTX 1050i
  
• Updated ASUS Strix Z590-A MB drivers
  
• Checked SSD (SanDisk SDSSDHP256G) firmware updates, no issues.
  
• Ran sfc /scannow - Windows Resource Protection, no issues.
  
• Ran Windows Memory Diagnostic, no issues.
  
• Ran Error Checking Tool on SSD, no issues.
  

I would gratefully appreciate any answers & help to resolve these issues.