Windows 10: Multiple BSODs after installing new GPU

Recently I installed a new AMD RX 7800XT gpu in my system, and now it is constantly bluescreening and crashing and will not launch any games. Prior to installing the new GPU I had an Nvidia RTX 3060 Ti which worked fine and never had any of these issues I had not bluescreened even a single time before. I have tried using 2 different 8-pin power connectors for the new GPU, reseating the RAM, uninstalling and reinstalling the graphics drivers for both Nvidia and AMD, changing back to the old GPU, and running the system file checker scan the result: Windows Resource Protection found corrupt

:)

 

BSOD before new GPU and PSU, more BSOD afterwards

(yes I asked chatGpt to make the post for me for fun!)

Hello Microsoft Community,

I recently upgraded my GPU and PSU, hoping to improve my system's performance. However, I've been encountering a significant increase in Blue Screen of Death (BSOD) errors since the upgrade. Prior to formatting and installing the new GPU, I did experience some occasional BSODs, which I attributed to driver errors. Since I had planned to format my system anyway, I didn't investigate further at the time.
I also encounter a lot of frame rate drops, mostly while playing games but also during normal usage.

Here are the details of my current situation:

1. New GPU: I purchased and installed an AMD 580x GPU.
   
2. PSU Replacement: I replaced my old PSU, which was approximately 10 years old, with a new one.
   

BSOD Error Codes I've encountered:

1. MEMORY_MANAGEMENT
   
2. IRQL_NOT_LESS_OR_EQUAL
   
3. PAGE_TEMPLATE_NOT_FOUND
   

Troubleshooting Steps Taken:

1. Memtest86: I ran Memtest86 from a USB drive, and it reported zero errors.
   
2. System File Checker (SFC): I ran the "sfc /scannow" command, which detected and fixed some errors.
   
3. DISM (Deployment Image Servicing and Management): I executed the "DISM /cleanup /restorehealth /cleanup-image" command to ensure the system image was in a good state.
   
4. Chkdsk: I ran a disk check using the "chkdsk" command.
   
5. Disk Repair and Defrag: I performed disk repair and defragmentation.
   
6. Driver Updates: I updated all drivers using Windows Update, and I also downloaded and installed the latest AMD drivers for my GPU (AMD 580x).
   

Despite undertaking these troubleshooting steps, the BSODs persist with greater frequency than before. I'm reaching out to the community for any guidance or suggestions on how to resolve this issue.

Minidump files:

https://drive.google.com/file/d/1RKq_oNeDNs-ktwsO0OrcY45hLATJTY9L/view?usp=share_link

 

Multiple BSODs after installing new graphics card

Hello,

I've upgraded from my GTX 1070 to a RTX 3070 in early March and I'm encountering various BSODs regulary a week ever since. The BSODs occur when watching YouTube videos, running GIMP 2.10.34 and sometimes even in Idle state where no program is active that consumes massive performance.

Directly after upgrading I made sure to update to the latest drivers via GeForce Experience.

Before the graphics upgrade everything was running perfectly fine.

I have tried multiple options to fix the issue without any success:

• Revert to a previous Windows 10 version from before changing cards
  
• After that fresh Windows 10 install on the same SSD
  
• Installing new drivers for all programs
  
• Revert to 1070 with drivers update
  
• Reinstalling graphics drivers via DDU
  
• Repair functions of Windows and the command prompt
  

I have also been running 1 complete test of the 4 cycles with MemTest86 without any errors.

Some of the BSODs

• BAD_POOL_CALLER
  
• SYSTEM_SERVICE_EXCEPTION
  
• IRQL_NOT_LESS_OR_EQUAL
  

System:

• CPU
  
  Intel(R) Core(TM) i7-10700K CPU @ 3.80GHz
  
• Motherboard
  
  Gigabyte Z590 LGA1200
  
• RAM
  
  Corsair Vengeance 2x16GB DDR4 3200 MHz
  
• GPU
  
  Gigabyte GeForce RTX 3070
  
• PSU
  
  Corsair HX Series HX750 80+ Platinum
  
• Operating System
  
  Windows 10 Pro 22H2
  

Here is a link to my GoogleDrive with multiple minidumps.

https://drive.google.com/file/d/1yVY5KeSSjs_kYX7TbGoZy028K2RDzFad/view?usp=sharing

 

Multiple BSODs after Windows 11 Installation

After installing Windows 11, I get multiple BSODs each time it tries to boots (logo phase).

I have Windows 10 alongside with it, it is working without any problem.

I installed it bypassing TPM and Secure boot because my PC doesn't support it, since it's an old laptop.

Specifications:

• Asus ROG G74SX
  
• CPU: i7-2670qm (8x2.2ghz)
  
• GPU: GTX 560M
  
• MEM: 2x8GB + 2x2GB DDR3 (1333MHz)
  
• SSD: Kingston 240GB
  
• HDD: Hitachi 700GB
  

So far, these are all the BSODs I tracked:

• SYSTEM THREAD EXCEPTION NOT HANDLED
  
• KERNEL MODE HEAP CORRUPTION
  
• IRQL_NOT_LESS_OR_EQUAL
  
• Kernel Security Check Failure
  
• FAT FILE SYSTEM