Windows 10: Multiple BSODs daily unknown cause

Hi,I have been hitting multiple BSODs daily on my W10 install. I have tried reinstalling windows multiple times, changed/RMAd my RAM & PSU and reinstalled all drivers etc. and still have been hitting multiple errors daily.Can you please help check if there is any info. in the dumps that will help check what is causing the error - https://1drv.ms/u/s!AsmnTxWGhZM7iH1MAA_YIEzqJRDk?e=UPCqCsPFB system specs details for reference - https://1drv.ms/u/s!AsmnTxWGhZM7iH5vmwdZ5yU1RGB7?e=A4qfpfThanks in advance.

:)

 

BSOD Unknown Reason

The dump file on the 18th was caused by Quick Heal again. The later ones appear to be due to bit flips. I would recommend enabling Driver Verifier on all third-party drivers using the following instructions:

1) Search for verifier using the Start Menu and select the verifier.exe, accept the UAC prompt and you should be presented with the following screen:





2) Tick the following options as shown below





3) Ensure that you select the option to enable you to select drivers yourself





4) Select all drivers which are not Microsoft related and then click the Finish button. Afterwards, please reboot the computer and Driver Verifier will continue to run in the background. Please do not select the drivers which are prefixed with dump_

 

Multiple BSODS with different errors, caused by ntoskrnl.exe

Wow thats a lot of usual causes!

Just to clarify / remove some things of that list, as mentioned the RAM has passed memtest multiple times, none of my hardware is OC'd, BIOS is fully up to date.

As far as I'm aware this is because its the single ram speed, and with it being DDR its 800*2=1600, I could be mistaken though?

As for the slots basically I was having BSOD's whenever any module was installed in one of the channels, so I had to move both modules over to the other channel, and this seemed to fix it, however I can move them back around to see what happens.

As for the memory I could have sworn I saw it on the supported list a while ago, ill check with the vendor of my PC.

Thanks for all the help

So whats the next step?

 

BSOD DPC_Watchdog_Violation daily

Those steps are not relevant to me. In those steps it asks to check the IDE ATA/ATAPI controllers for iastore.sys in the listed drivers.

I do not have iastore as a driver nor is that the files causing the BSOD.

The driver that is causing it (I got this from BlueScreenView) is nvstore.sys which is listed as the driver for three identical items in 'storage controllers' There are 4 items there. 3 of them are called NVIDIA nForce Serial ATA Controller. Those three
all list this nvstore.sys as their driver.

I suspect that if I could replace or fix that driver it would solve the issue based on the advice given by Annanya. Does that sound right? If so, how would I go about it?

Dan