Windows 10: Multiple BSODs with different stop codes?

I have a relatively new PC, but keep getting random blue screens with a different driver and stop code each time. I can't narrow down the source. Windows 11 is updated to 22H2 and I have installed drivers to their latest version as well as the BIOS firmware. Here are a few of the following errors:SYSTEM_PTE_MISUSE caused by ntoskrnl.exeDRIVER_IRQL_NOT_LESS_OR_EQUAL caused by USBXHCI.sysblank bug check string caused by amdkmdag.sysIRQL_NOT_LESS_OR_EQUAL caused by ntoskrnl.exeATTEMPTED_WRITE_TO_READONLY_MEMORY by wdiwifi.sysLink to DMP filesMP FilesThanks for your help!

:)

 

BSOD with multiple stop codes

• Problem
  

The problem is that I get a blue screen of death (BSOD) frequently for a few months now, and it increases in frequency once I've had the first one. For example, if I leave my computer on for a while, it'll run normally for a few hours before I get my first BSOD. After I get a BSOD, I get a lot more afterward over the period of 30 mins - 1 hour. The stop codes I get are different every time so there's no way of saying which one I get the most.

• Problem history
  

I don't remember exactly when I had this problem or what triggered it. But at the time I hadn't changed any hardware components or installed new software. However, I used to only get the stop code IRQL_NOT_LESS_OR_EQUAL. After some attempts of troubleshooting, I started getting all the stop codes besides IRQL_NOT_LESS_OR_EQUAL to this moment. I don't remember which step exactly of troubleshooting triggered this change though.

• Specs:
  

1. Windows: Windows 10 x64
   
2. Motherboard: Asus Strix B450-F Gaming
   
3. CPU: AMD Ryzen 5 3600
   
4. Memory: Corsair CMK32GX4M2E3200C16 Vengeance LPX 32 GB
   
5. Hard disks: KINGSTON SA400S37240G / WDC WD10EZEX-21WN4A0
   
6. Graphics card: MSI GeForce RTX 3060 GAMING X
   
7. Power supply: don't remember exact model but it's Corsair 550W
   

• Troubleshooting:
  

1. Changed GPU (from GTX 1060 to current)
   
2. Changed RAM
   
3. Turned D.O.C.P off
   
4. Turned D.O.C.P on
   
5. Updated all drivers (chipset, graphics, etc..)
   
6. Updated BIOS
   
7. memtestx86 (no errors)
   
8. CheckHealth
   
9. Updated windows
   
10. Installed fresh windows (wiped everything) and reinstalled all drivers.
    
11. Tried different RAM that I am sure is not faulty
    

• Notes:
  

1. I tried installing fresh windows multiple times and I noticed that every time I get insanely many BSODs before I install the chipset driver. Then it returns to normal frequency as stated in the 'problem' section.
   
2. Every time I check the performance monitor I see the message below or something similar:
   
   
   
   

 

BSOD when coming out of sleep, multiple error codes

Thanks for the assistance, I've run all the necessary steps. It looks like there might be an issue found when running that first command. I have also installed all the driver updates recommended by the dell support check.

You can find the logs of the command prompt window in the cmd.log file

cmd logs.txt

 

BSOD with multiple stop codes

Problem
The problem is that I get a blue screen of death (BSOD) frequently for a few months now, and it increases in frequency once I've had the first one. For example, if I leave my computer on for a while, it'll run normally for a few hours before I get my first BSOD. After I get a BSOD, I get a lot more afterward over the period of 30 mins - 1 hour. The stop codes I get are different every time so there's no way of saying which one I get the most.

Problem history
I don't remember exactly when I had this problem or what triggered it. But at the time I hadn't changed any hardware components or installed new software. However, I used to only get the stop code IRQL_NOT_LESS_OR_EQUAL. After some attempts of troubleshooting, I started getting all the stop codes besides IRQL_NOT_LESS_OR_EQUAL to this moment. I don't remember which step exactly of troubleshooting triggered this change though.

Specs
Windows: Windows 10 x64
Motherboard: Asus Strix B450-F Gaming
CPU: AMD Ryzen 5 3600
Memory: Corsair CMK32GX4M2E3200C16 Vengeance LPX 32 GB
Hard disks: KINGSTON SA400S37240G / WDC WD10EZEX-21WN4A0
Graphics card: MSI GeForce RTX 3060 GAMING X
Power supply: don't remember exact model but it's Corsair 550W

Troubleshooting
replaced GPU (from GTX 1060 to current)
replaced RAM
Turned D.O.C.P off
Turned D.O.C.P on
Updated all drivers (chipset, graphics, etc..)
Updated BIOS
memtestx86 (no errors)
sfc /scannow
Updated windows
Installed fresh windows (wiped everything) and reinstalled all drivers.
Tried different RAM that I am sure is not faulty

Notes
I tried installing fresh windows multiple times and I noticed that every time I get insanely many BSODs before I install the chipset driver. Then it returns to normal frequency as stated in the 'problem' section.


v2 log files: OneDrive