Windows 10: My 2 monitors lose signal after I change a setting in a game.

About 2 months ago I got a new GPU. The GPU is the ASUS Dual OC RTX 2060.The first day that I got the gpu I played some Teardown, Roblox and Fortnite. Then I went on Red Dead Redemption 2 and changed some settings. Immediately after hitting apply my 2 monitors shut down and stopped showing signal but the PC was still running.I thought the issue was just overheating so I got 2 Be quiet Silent wings 2 120mm case fans. The GPU and CPU temperatures were alot better, but I went on GTA V and turned off VSync. My 2 monitors Immediately crashed while the PC was still running. I left the PC on for abou

:)

 

GTX 1050 ti Monitors Lose Signal

So far there's been a catalogue of symptoms, and the worrying thing is there are literally pages and pages of the same issue with GTX 1050's on the GeForce forums.

Symptoms so far:

• After getting to the logon screen, both my 4K monitor (plugged in via DP) and my 1080p monitor (plugged in via HDMI) spuriously lose signal for ~5 seconds then come back. This happens constantly with no apparent timing.

• Whenever I open a game launcher (not a game), or Google Chrome, the screen flickers again, only this time I get a Windows 10 event alert saying "application has been blocked from accessing graphics hardware".

• When I check event viewer System logs, the yellow triangle simply says "nvlddmkm stopped responding" in each case of the monitors losing signal.

Attempted fixes from numerous threads:

• Installed the latest Game Ready "stable" drivers, installed latest "beta" drivers, and also installed some random "stable" drivers from a month ago. Uninstalled previous drivers with DDU each time and restarted before and after installation. Issue seems to persist sporadically.
• Turned PCI Power Management off in Windows Power Settings. No change.
• Switched Power settings in NVidia Control Panel to Maximum Performance. No change.
• Gone into the registry and added a QWord(64bit) to CurrentControlSet001/Graphics/Drivers called "TdrDelay" and set it to 8 (also tried 10). No change.
• Tried unplugging the secondary monitor. Managed to play Warframe for an entire evening without a monitor signal loss.
• Switched secondary monitor to DVI Single Link cable to 1050 ti, and also tried secondary monitor on iGPU with primary monitor on 1050 ti. Still get signal losses on main monitor, secondary monitor does the same but is delayed (WTF?).
• Downclocked GPU 50Mhz. No change.
• Increased Power Limit by 5%. No change.

Fixes I still need to try:

• Try a different DP cable in main monitor/try HDMI cable instead.
  
• I get the signal loss when I open Chrome, going to turn off hardware acceleration as that apparently solves things
• Use a DWord(32bit) registry key instead of QWord for TdrDelay
• Going to try the 375.50 drivers, as they're allegedly old but stable for low power Pascal GPUs.
• Resetting CMOS for whatever reasons - some random guy said this solved his issues.

Fairly convinced it's not a hardware issue since there are so many people with the same issue as me. One slight glimmer of explanation is that Micron memory may be at fault, I need to check if its Samsung or Micron stuff on mine. Apparently there were some GTX 1070 stability issues with Micron VRAM that were fixed with an update.

My entire system has been stable for years, sporting a R9 295x2 up until 6 months ago with no stability problems. Doubt it's PSU related. Motherboard is also on the latest 2.50 BIOS.

Help me TPU, you're my only hope.

 

Trouble with 2 monitors

Hi Tim,

Thank you for posting your query in Microsoft Community.

I suggest you to change the settings to Extended Monitor and check if it helps.

Please follow below steps:

• Right Click any ware of the Desktop, and launch Personalization.
• Go to dual monitor settings under personalization, and change it Extended Monitor.

Please get back to us for future support, we’ll be glad to assist you further.



Thank you.

 

Losing signal from graphic card the moment I start game

Actuall problem: the moment I start Left4Dead2 game I'm losing signal - monitor say "no singal".

• Windows 10 Pro Version 1703
  
• Processor: Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz 3.50
  
• Graphic Card: NVIDIOA GeForce GTX 980 Ti
  
• Motherboard: ASUS Z170 PRO GAMING Z170 LGA1151
  

A more detailed description from potential start:

(this part probably not related) Few month ago my graphic card (GTX 660 Ti) stopped working - I lost signal to monitor the moment I turned on computer. Some tests showed, that card works on other computers, and other cards work on my computer. Problem was not resolved, few days ago I get new but used graphic card.

(more related?) Had problem with game "shadow of mordor" - I were losing signal the moment I started the game. Computer was working well. Left4Dead2 was working well. I managed to fix it, found solution, had to open nvida control panale and change some options for this game, to use this graphic cards. I can't find this solution now so I can't recreate exactly this solution.

(most related?) I updated Windows. For a moment shadow of mordor didn't work like before. Couldn't find the Nvidia control panel. I reinstalled drivers, Shadow of morder is working now. I checked Left4dead2 - not working, like Shadow of mordor before (and it DID work before update!). Uninstalled and installed the newest driver pack form Nvidia, same problem, Left4Dead still give no signal the moment the game start.

With shadow of mordor and other games there IS still sort of problem - for o short moment I'm losing signal from card, monitor "clicks off", but the moment later, game start and I'm getting signal back. So something is still wrong (never before my monitor "clicked off" even for a moment without a reason) but in the end it works perfect.

Still can't find nor install "Nvidia control panel" anymore.

When alredy in game have no problems. Everything works perfect, great details, higs performance, no artifacts, high FPS, no shutdowns, etc. etc.