Windows 10: My audio system seems to be having some strange issue.

So, for some oddball reason, if I have no audio playing, and then I suddenly have say, a ping from Discord, it will be almost inaudible. However, if I do have music or any other audio playing, it comes through just fine. It's as if my sound driver or something similar needs to be "warmed up" before quick little bits of audio come through audibly. Is there any reason as to why this is happening? An issue with the audio drivers, or maybe my wireless headset? I use a Corsair HS55 Wireless headset, so if there's a problem there, I apologize for any inconvenience.

:)

 

Have windows 10, and suddenly my audio stopped

Hi,

Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

As the above description is not clear, do let us know the following to assist you better with this issue:

• What is the exactly issue you are facing with audio and how exactly are you trying to access it?
• What exactly do you mean by: Have windows 10, and suddenly my audio stopped?
• Have you made any changes to the operating system, prior to this issue?

I suggest you to install all the pending updates and audio drivers and check if it helps.

Step 1: I suggest you to update the audio drivers from Device Manager and check.

Steps:

• 
  Right click on the Start
  button from the desktop and select Device Manager.
  
• 
  Expand Audio inputs and outputs, right click on
  High Definition Audio Device and click on Update driver software.
  
• 
  Also, try to search for the drivers with the help of model number of your computer from the Manufacturer’s website and install them.
  

Step 2: I suggest you to install all the pending updates after upgrade to Windows 10.

• Connect to the internet.
• Press Windows key and type
  updates.
• Click on Check for updates.
• Under Windows Updates, click on
  Check for updates.
• Try to install the updates being shown.

Hope it helps. Reply to the post with an updated status of this issue and required information, we will be happy to help you accordingly.

 

headphones directional audio issue

Hi

Welcome to Microsoft community.

It sounds like you've identified that your Razer Kraken headphones have suffered some physical damage that affects the directional audio, and you're looking for a way to make them usable by playing all audio through the working part of the headphones. Here are a few steps and suggestions you can try to achieve this:

Step 1: Enable Mono Audio and Adjust Volume

Since you mentioned that enabling mono audio makes the sounds incredibly quiet, you can try to increase the system volume and the application volume to compensate. Here’s how to do it:

1. Enable Mono Audio:
   
   • Open Settings.
     
   • Go to Ease of Access > Audio.
     
   • Toggle on Turn on mono audio.
     
2. Adjust System Volume:
   
   • Right-click the sound icon in the taskbar and select Open Volume mixer.
     
   • Ensure all volume sliders are set to maximum.
     
3. Adjust Application Volume:
   
   • Open the application you are using (e.g., Fallout 4).
     
   • Go to the audio settings within the application and ensure the volume is set to maximum.
     

Step 2: Check Realtek Audio Console Settings

Since you have Realtek Audio Console, ensure it’s configured correctly:

1. Open Realtek Audio Console:
   
   • Search for Realtek Audio Console in the Start menu and open it.
     
2. Check Speaker Configuration:
   
   • Go to the Speakers tab.
     
   • Ensure that the Headphone Virtualization and Front left and right full-range speakers are configured correctly.
     
3. Use Loudness Equalization:
   
   • Go to the Enhancements tab.
     
   • Enable Loudness Equalization to help balance out the audio levels.
     

Step 3: Hardware Fix (Optional)

If you're comfortable with a bit of DIY, you could try to repair the headphone cable. This involves:

1. Cutting the damaged part of the cable.
   
2. Soldering the wires back together or using a new 3.5mm jack.
   
3. Covering the exposed wires with electrical tape or heat shrink tubing.
   

There are many tutorials online that can guide you through this process. However, this requires some basic knowledge of electronics and soldering.

If none of these solutions work, it might be time to consider investing in a new pair of headphones.

Let me know if you need further assistance.

Best regards

Derrick Qian | Microsoft Community Support Specialist

 

Audio Issues and Windows 10

Hi,

Welcome to Microsoft Community. I understand the inconvenience you are facing. I will certainly help you with this.

According to the issue description, the issue is related to audio recording. I suggest you to try troubleshooting recording audio and check if it helps:

I suggest you to run the Recording Audio
troubleshooter and check if it helps.

• Type troubleshooting in the search bar.
• Select Troubleshooting.
• Select View all on the top left corner.
• Click on Recording Audio.
• Follow the on-screen instructions to run the troubleshooter.
• Check if issue persists.

If issue persist, try installing audio driver in compatibility mode. Compatibility mode runs the program using settings from a previous version of Windows. Follow these steps to install the drivers in compatibility mode and check if that helps.

• Download the audio driver from the manufacturer’s website.
• Right-click on the driver setup file and click on ‘Properties’.
• Click on the ‘Compatibility’ tab and check the box
  ‘Run this program in compatibility mode for’ and select Windows 8/8.1 operating system from the drop down menu and proceed with the installation. Once this is done, restart the computer and check if the issue persists.

Hope this information helps. Please post back with the results, we will be glad to assist you further.

Thank you.