Windows 10: My computer 2-3 months old can't detect any bluetooth device

Tried : - uninstalling Bluetooth Device - "updating" bluetooth drivers no updates - activating advanced parameter + allow computer to be found - checking if device was wrong it was not, also tried resetting it - run "sfc /scannow" and found I had corrupted files, now repaired => no effect after restartI'm running out of ideas, so it would be nice if anyone has other ideas I could do I'm waiting to see other options before doing a system reset by re-dowloading system files via this link that was suggested before : www. elevenforum.com/t/repair-install-windows-11-with-an-in-place-up

:)

 

Cannot use bluetooth device

1 Pairing is done in Settings, Devices
1.1 You click on Add Bluetooth or other device
1.2 You choose Bluetooth
1.3 If there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
1.4 The computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then Windows could not detect it.
1.5 It connects - pairing includes connecting
1.6 The computer sounds a buzz in the earpiece then displays Your device is ready to go and you click on Done
1.7 The device is shown in the devices list below the subheading Audio and it shows it as connected
1.8 The device should also appear in Control panel, Sounds, Playback tab
1.9 The device should also appear in Control panel, Devices & printers
1.10 {I just paired some bluetooth earphones as I typed so I could make sure these notes were correct} You use a music player and the sound comes out of the bluetooth earphones

2 If this is not happening for you then go to Contol panel, Devices & printers
2.1 Right-click on the device & select Remove device
2.2 You can now try pairing from scratch again
2.3 Several other users have reported that only removing the device with Bluetooth command line tools - BluetoothInstaller allowed them to re-pair again [see xzion's guidance below]
2.4 Yet others reported that only the KeithM code or Bungee's guidance worked for them [see below]

3 Where is this all going wrong for you?
[I assume we are definitely talking about bluetooth headphones/earphones. I understand that WiFi ones do also exist.]


4 Additional guidance -

Unpair a Bluetooth Device - TenForumsTutorials
Connect a Bluetooth device in Windows - Windows Help

Steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #22, KeithM] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #39, Bungee] - TenForums
Several people registered in TenForums just to be able to thanks xzion, KeithM & Bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.


Denis

 

Cannot use bluetooth device

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

 

I don't have any bluetooth devices but windows turned it on!!


Then if they are still on, try some of these steps listed below, Not all of these steps may not apply, but, step #2 and #4 should help. I have all 4 steps on myself.

1 Go to Device manager and DISABLE Bluetooth, Do Not remove!
2 Turn USB suspend off
3 Set Hard Drive or SSD to Never
4 Turn Link State Power Management off
Settings 2 thur 4 can be found in your Power Management Settings.
Then click on "Change settings that are currently unavailable"
Then Reboot your Computer. This does work, may come back if you shut OFF your computer,then turn it back on, if it does, just a reboot will turn it off again.