Windows 10: My computer got error 0x000000e

My computer got error 0x000000e I don't know reason why I can't load my windows ,my disk being bitlocker , I never ever login any microsoft account, maybe I forget .it got error 0x000000e The data on the disk is very important . It is all of my lifeCan some one help me resolve the problem . pls

:)

 

"A required device isn't connected or can't be accessed" Error 0x000000e on Windows 10

I wanted to install an SSD in a Laptop with 2 HDDs, one of which is not used. I took out the HDD which was not used, replacing it with the SSD and leaving the HDD with the
current Windows 10 Operating system. I then installed Windows 10 from media creation on the new SSD. But I receive the error : "A required device isn't connected or can't be accessed" - "Error 0x000000e", when I select the new
Windows installation from the Boot Manager.

Steps followed:

1. Replace HDD with new SSD. (Still with 1 OS HDD installed)
2. Create Windows 10 installation media with the Media Creation tool from Microsoft.
3. Boot from Windows 10 installation media.
4. Install Windows 10 on the new SSD. (no volume exists)
5. Installation Completes.
6. Re-boot.
7. Windows Boot Manager shows the 2 Windows 10 Installations.
8. Select the new installation.
9. Receive the error : "A required device isn't connected or can't be accessed" - "Error 0x000000e"

After some research I have found the following two options:

Option 1: This seems like a simple solution, but will I be able to boot from both Operation Systems (OS) after this?

1. Reformat the Partition created on the SSD for Windows 10
2. Remove the old HDD from the Laptop
3. Reinstall Windows 10 from the installation media

Option 2: This is the most common suggestion but the information around this fix is fairly limited, I don't understand why this simple installation would cause issues here? I did run bootrec /scanos and no OS was listed.

1. bootrec /fixmbr
2. bootrec /fixboot
3. bootrec /scanos <--- If no OS is found run the following
   1. bcdedit /export C:\bcdbackup
   2. C:
   3. cd boot
   4. attrib bcd -s -h –r
   5. ren C:\boot\bcd bcd.old
4. bootrec /rebuildbcd

Option 2 found from sources such as, Fix the MBR – Guide for Windows 10, 11, XP, Vista, 7, 8 / FIX: A required device isn't connected or can't be accessed 0x000000E on Windows 10/8/8.1

 

Windows 10 Boot Error

Hi Max,

The error code 0x000000e may occur due to the following issues:

• Program lock-ups.
• Slow PC performance.
• System freezes.
• Startup and shut down issue.
• Installation and hardware failure.

To resolve the boot error code 0x000000e, we suggest that you follow the Startup Repair steps below:

• Turn off your computer.
• Turn on your computer. As soon as you see the Windows logo with the spinning dots, press and hold down the power button until your computer turns off. Do this process
  twice.
• Turn on your computer for the third time, and let it load.
• It should give you the message: Preparing Automatic Repair.
• On the next screen that would appear, click on Advanced Options.
• Select Troubleshoot.
• Go to Advanced Options.
• Click on Startup Repair.
• Wait for the repair to finish.

We would appreciate it if you could get back to us and provide us your feedback.

 

Error: No work available to process

Hmm. Either it's put out errors and WCG is limiting the work units available, or the project list may not be set to supply other WU when one runs out. (if the problem lies here and not on your end)

On the options to your left, if you go into Results Status, select the computer from Device Name and then look through results see if either they were returned late, errors or any other kind of issue that would stop the servers supplying WU from that perspective.

If there are no errors then it's maybe down to your project list. So selecting Device Manager from the left menu and then clicking on the profile assigned to that computer and make sure that it's assigned to receive WU for other projects if they run out.

At least those steps will rule out problems from the WCG end.