Windows 10: my computer is using 80% of RAM memory with no reason

I have an i59400f GTX1660TI with 8gbRAM. I saw that in desktop with no apps openned my RAM is going up to 80%. so i go to see the services and i saw this, i know that is an w10 hoster, but theese all services are necessary ?????

https://preview.redd.it/7szgtgicbrg...bp&s=c93b986be89be77e26c13fbf3b1bf348d3b6d807

submitted by /u/dkcvl
[link] [comments]

:)

 

Windows 10 & Problems With System and Compressed Memory Taking Up All Of The Computer's RAM

Ive also already ran the Memory Diagnostic Tool hundreds to thousands of times every time System and Compressed Memory is shown to be using all of my computer's RAM/Memory and it too has stated that there are no problems with my computer's Memory/RAM either.
I've also ran it after many restarts to clear up System and Compressed Memory so that it isn't using all of my computer's Memory/RAM until the next time it does it again and again. It's always after a few hours of use with the computer and it doesn't matter
if anything is being used or if the computer is idle. It is even worse directly after waking the computer up from it going to Windows 10's login screen or should I say the pictured (screensaver) screen.

I can easily post a screenshot taken with my iPad of the fact that the Memory Diagnostic Tool shows that there is no memory problems whatsoever either!

 

Issues with total memory size of dedicated available RAM

Hello Gevorg,

Thank you for posting your concern in Microsoft Community an we regret for the inconvenience.

From the description provided, I understand that the motherboard you are using has 4 DIMM slots which supports up to 8 GB of dedicated RAM.

To be able to understand the issue better. let us know how are you viewing the total memory size of dedicated available RAM in your PC.

Now, in one case, if you are using more than one module of RAM, and the frequencies at which they operate are not the same. There will be two outcomes:

• The modules will conflict in terms of DIMM frequencies and it will declare memory failure.
• Instead of downclocking one or more RAM/s, the motherboard will reject the ones from being accepted.

In order to ascertain if the hardware is correctly configured, I suggest you to check the system information in the BIOS settings. Refer to the manufacturer provided manual to know more about on how to access the BIOS settings.

In another scenario, your computer may also be allocating part of your RAM to other hardware modules, such as your network hardware.

As a secondary workout, I suggest you to increase the Virtual Memory and check if it helps. Follow the steps below.

• 
  Click Windows key + R to open the RUN command utility and type
  msconfig.exe, then press ENTER.
  
• 
  Click on Boot option and select advanced options.
  
• 
  Check the maximum memory box and change the value accordingly.
  
• 
  Click on Apply and Ok to save changes and click Restart the computer.
  

Hope the above information is helpful.

Thank You.

 

HP stream wont update windows 10 , not enough memory

Hello,

To better assist you, we suggest that you check the RAM of your computer and the memory usage by following the steps provided below:

• Open Task Manager.
• Click on More details.
  
• Click on the Performance tab.
• Click on Memory.

Update us with the result.

Thank you.