Windows 10: My computer not booting repair crashes

Hello I have problem with my computer my computer is not booting when I choose repair my computer computer it crashes if I choose startup repair it also crashes safe mode also not opening I have no dvd bootable pendrive no other pc

:)

 

Unable to boot the computer.

Hi Samid,

Thank you for posting your query on Microsoft Community.

Before we proceed, we would require more information to assist you further.

• 
  What is the make and model of your computer?
  

I suggest you check if you are able to boot into Windows Recovery Environment using installation media. Follow the steps provided below and check.

• • Insert the installation USB and boot Windows 10 from it.
  • In the ‘Windows setup’ page select the ‘language to install’, ‘Time and currency format’ and the ‘keyboard or input method’ and click on ‘next’.
  • Click on ‘Repair your computer’ and select ‘Troubleshoot’.

Check if you are able to boot to this window. If you are unable to boot to this window, I suggest you to contact the manufacturer and check.

Hope this information is helpful. Reply us with this information to assist you further.

Thank you.

 

all games crash!

I suggest you run rthdribl > http://www.daionet.gr.jp/~masa/archives/rthdribl_1_2.zip
Increase the window size step by step and watch your vga temps permanently.
What happens?
If it crashes, run at stock speeds as suggested before and retry.

P.S.: When your system locks, does the display signal turn off after a time?
Stuttering sound or no sound at all when freezing?
What X1800XT model do you own exactly?

 

Your computer needs to be repaired. Error: 0Xc0000185

Hi,

Thanks for the update and response.

Startup Repair is a Windows recovery tool that can fix certain system problems that might prevent Windows from starting. Startup Repair scans your PC for the problem and then tries to fix it so your PC can start correctly.

If the issue persists even after startup repair I suggest you to follow the below steps and check if it helps.

You will have to use Windows 10 installation media to follow the steps to boot into Recovery Environment and try to rebuild BCD.

Step 1: I suggest you to create an installation media for
Windows 10 using the media creation tool:

Installing Windows 10 using the media creation tool

Step 2: After preparing the installation media, insert it hard reboot the device and follow the below:

• Boot into Windows Recovery Environment using the Windows 10 installation media.
• Click on Repair your computer.
• Click on Troubleshoot and in the Advanced options.
• Select Command Prompt. Type the following commands into the prompt and press Enter key after each command.

• bootrec /fixmbr
• bootrec /fixboot
• bootrec /scanos
• bootrec /rebuildbcd

5. Restart the computer.

NOTE: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft
cannot guarantee that any problems resulting from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

Hope it helps. Reply to the post with an updated status of this issue for further assistance.