Windows 10: My computer on driver c: is running out of disk

its have 2 partition c and d I want to transfer program files on d: my drive c capacity is 60gb and 2 gb remaining while my drive d is 60 gb and 57 gb free, it is very annoying i cant install automatically because they always prompt to free up c: folder and my d is doing nothing. how to solve it,

:)

 

when i rebuild bcd,run bcdedit /export c:\bcdbackup,An error occurred

an ERROR IS The storage export operation has failed and the system cannot find the specified FILE

because when laptop startup,screen display Not connected or unable to access the required device
Error code 0Xc000000e

but，i run bcdedit /export d:\bcdbackup,The screen shows that the operation was successful

I run these commands step by step

1.bootrec /fixmbr

2.bootrec /fixboot

3.bootsect /nt60 sys

4.bootrec /fixboot

5.bcdedit /export c:\bcdbackup

6.attrib c:\boot\bcd -h -r -s

7.ren c:\boot\bcd bcd.old

8.bootrec /rebuildbcd

An error occurred in the fifth step

i use diskpart and list volume

Disk C is only 260M, Disk H is the system disk, Disk D is a removable disk

so What command should I enter in the fifth step

 

Disk management console view is not up-to-date

i dont know how to fix your disk management, but i can fix your partition problems...




open up Command Prompt with admin rights. (Right click, run as admin)


enter in
DISKPART
list disk

then find the Disk number for your Raid array... lets call it number 7 ( you can tell what disk is what by the total size)
type in

Select Disk 7
List Partition (will give you a list of all the partitions..)
Select Partition 1 (im assuming you only have 1 partition on Disk 7) repeat this step if you have more partitions.
ASSIGN


that should get the array up and running ready to use.


EDITED.

any problems, post back ^^


Still EDITING *Stick Out Tongue

side question, have you tried restarting the PC?

 

USB Hard Disk Drive not recognised

Hi Nicholson,

Thank you for your interest in Windows 10.

I suggest you to follow the methods below and check if it fixes the issue.

Method 1: Run Hardware and Devices Troubleshooter

Follow these steps to run Hardware and Devices troubleshooter:

• 
  Press Windows key + X and click on
  Control Panel.
  
• 
  Select Troubleshooting.
  
• 
  Select View all on the top left corner.
  
• 
  Click Hardware and Devices.
  
• 
  Follow the on-screen instruction to run the troubleshooter.
  

Method 2

I suggest you to check if the disk is listed in Disk management utility. If it is listed, run an error check to see if there are any corrupted files causing this issue.
Refer these steps:

• 
  Press Windows key + X, select
  Disk management.
  
• 
  Right click on the drive and select properties.
  
• 
  Under tools tab, click on “Check” button under Error Check.
  

Method 3: Uninstall and reinstall USB drivers

Follow the steps to uninstall the USB drivers:

• 
  Press Windows Key + X key and click Device Manager.
  
• 
  In Device Manager, double click to expand "Universal Serial Bus controllers".
  
• 
  Right click on the Host Controller, click "Uninstall" and click "OK".
  
• 
  Select the option to Delete driver software.
  
• 
  Uninstall all items under "Universal Serial Bus controllers".
  
• 
  Restart the computer after its uninstalled.
  

Try to access the computer manufacturer's website and download the latest chipset drivers for your computer and install the same.

Hope this information is helpful. Please do let us know if you need further assistance, we’ll be glad to assist you.