Windows 10: My computer won't boot after I got memory error

I was just using my computer normally, then everything on my computer began to stop, from my network seemingly stopping before any windows applications before my computer itself shut down with a transparent blue screen that said "Unexpected Memory Overload" with no error code if I recall, and now my computer can't boot into windows since it seemingly can't detect anything to boot from. Also, in the boot menu, it doesn't usually detect my SSD, which is where I store my OS files.I use an 2tb SSD for my system files and games, a 4tb HDD, 32gb of ram, an Ryzen 7th gen CPU, a B550M ASROCK Pro4 mot

:)

 

computer won't boot but has power

Kursah, that 6 steps are granted it always boots at the 6th step (sometimes at the 4th) and I have to remove the ethernet cable every time otherwise I'll have to do countless steps, that's a fact. I do not have Wake On Lan set.

 

computer won't boot but has power

+1

And...

Does the mainboard have a speaker on it? If so are there any POST codes beeping?

Even though it's powering up I would suspect the PSU might be a culprit here...do you have another one you could try?

You state that you remove the Ethernet cable...do you have Wake On Lan set for any reason? What if you skip step 3 in your workaround steps? Does it still boot? Have you tried booting with just a keyboard, screen and power supply connected? (CPU and 1 stick of memory)

That should be the base line hardware required for a bootable system...if it boots there add an HDD, if it boots add the CD/DVD. Etc...

 

Error Message when updating from Win-7 to Won-10

Bree
I followed your suggestions (2nd Aug 19) for installing Win-10. Made the bootable flash drive successfully through the media creation tool. But when I attempted to upgrade and activate to Win-10 (64 bit) from within Win-7 (Pro-32 bit), I got the following error message:

Error # OxC1900101-Ox20017. " The installation failed in the SAFE_OS phase with an error during BOOT operation"

I read the diagnostics under this error number and carried out the proposed fixes, i.e. update Win-7, uninstall Malwarebyte antivirus, disconnect all external hardware, e.g. printer, scanner, external hard drives. I then tried to repeat the steps to do the upgrade through the Win-10 bootable flash drive as before. Got the same error message.
Appreciate any further comments and suggestions as to (a) what does a failure in the SAFE_OS during boot operation mean, (b) what can I do to solve it. Is this anything to do with the hardware in my computer? I listed these in my first posting above.
Thanks for any help