Windows 10: My computers Intel management engine interface driver failed to perform handshake with the...

My computers intel management engine interface driver failed to perform handshake with the firmware. What should i do?


* Moved from Community Participation Center

* Original title: Guys i need your help.

* OS not specified

:)

 

Intel Management Engine Interface Problems.

Hello, good afternoon.

Im having a problem with my PC, practically new, the problem began a few weeks ago, and is that when you turn off the PC by Windows> Shut down, the system shuts off and the the screen
goes into power saving mode, but the PC stays on and stops reacting, the only way to turn off its by pushing the physical button on the PC and the same happend when i turn it on again, the only way to fix it its by turning off the power source and disconnecting
it from the power and reconnecting it and this way it turns on normally.

Searching about this problem I found that it could be caused by an Intel device called "Intel Management Engine Interface" which, when I saw it in "Device Management", i noticed
that I had an yellow admiration symbol And a message which says that the device can not be started (Code 10), i update the Driver manually which solved the problem for a while, the PC shut down properly and the Symbol disappeared, but the problem comes back
after a few days , I tried to install several versions of the Driver as well as disable this device but it seems that nothing solves it definitively.

Among the solutions I found online, is to install version 9.5 of the device, mentioned that this version solved that problem, i tried to download and install the version but apparently
the model of the motherboard does not support such version.

i also found in the event log this error "Intel(R) Management Engine Interface driver has failed to perform handshake with the Firmware (FWSTS0: 0x90000045, FWSTS1: 0x002F0040)"

I appreciate the attention.

Some of my specs are:

Intel i5 6600K @3.5 Ghz

Motherboard: Asus B150M-A (Bios Ver 0602) (Rev. 1.03)

GPU: Asus Dual Geforce 1060

Windows 10 Pro x64

Intel Managment Engine Interface Driver: 11.0.0.1166

 

Intel Management Engine says device cannot start (code 10)

Same issue on Lenovo Yoga 370. With the setting turned on, we get the Device Power Failure issue and the WiFi drivers also fail to load. I've updated all drivers/BIOS from the Lenovo system update utility to no avail. This registry setting is meant to
prevent hacks through the DMA interface before logon. Setting it to 0 or removing it "fixes" the issue, but leaves you vulnerable to attack through the Thunderbolt interface.

We see events such as the following in the System event log when the setting is in place, along with longer boot times:

Intel(R) ISH Interface driver has failed to perform handshake with the Firmware.

Intel(R) Management Engine Interface driver has failed to perform handshake with the Firmware (FWSTS0: 0xA4000245, FWSTS1: 0x89118306).

Intel(R) Dual Band Wireless-AC 8265 : Could not allocate the resources necessary for operation.

Intel(R) Dual Band Wireless-AC 8265 : The version number is incorrect for this driver.

 

Intel Trusted Execution Engine Interface Driver

My computer is a Packard Bell Easynote ENTF718M Windows 10 Pro, version 1803, OS Build 17134.345; Bitdefender Total Security 2019
I received a notification of an error regarding above. Tried Troubleshooting - no solution. I went into Device Manager and checked device; tried updating driver and informed latest driver installed. Error code 10.
See attachments
I have found a suggestion to delete driver, restart, reinstall driver and restart again. I have not tried it as I am unsure of the exact driver file to uninstall / reinstall. I understand that drivers are in Windows/ System 32/ Drivers.








Not sure if serious problem or not. At present everything seems normal.