Windows 10: my hard drive is not repairing

Discus and support my hard drive is not repairing in Windows 10 Gaming to solve the problem; When I plug in my hard drive, the scanning and repair notification pops up so I press repair. The green loading bar gets finishes in about 2-3 minutes... Discussion in 'Windows 10 Gaming' started by Makayla J. Butler, May 14, 2023.

  1. MAKAYLA J. BUTLER
    Makayla J. Butler Win User

    my hard drive is not repairing


    When I plug in my hard drive, the scanning and repair notification pops up so I press repair. The green loading bar gets finishes in about 2-3 minutes but it stays like that. I let it sit like that for a couple hours because I assumed I had a lot on my hard drive so it needed extra time but it never finishes.

    :)
     
    Makayla J. Butler, May 14, 2023
    #1
  2. SIR B. FANNYBOTTOM
    Sir B. Fannybottom Win User

    Overclock your hard drive!!!

    Heres a much easier hack that I realized quite a few years ago that really does work!

    REQUIREMENTS:
    • Hard drive with molex power connection.
    • PSU with more than 1 strand that has molex plugs on it.
    • Wire strippers, soldering iron if you're fancy, electrical tape if you're not.
    STEPS:
    • Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
    • Cut the yellow and orange cables, then twist them together.
    • Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
    • Plug in a drive and feel the speed!
    Congratulations! You've just overclocked your hard drive!
     
    Sir B. Fannybottom, May 14, 2023
    #2
  3. ANTHONY'SHELPING HANDS
    Anthony'sHelping Hands Win User
    Im having a Repair C drive Errors.

    Try This

    Follow these steps to repair corrupt hard disk without formatting, and get back the data.

    1. Step 1: Run Antivirus Scan. Connect the hard drive to a Windows PC and use a reliable antivirus/malware tool to scan the drive or the system. ...
    2. Step 2: Run CHKDSK Scan. ...
    3. Step 3: Run SFC Scan. ...
    4. Step 4: Use a Data Recovery Tool.
     
    Anthony'sHelping Hands, May 14, 2023
    #3
  4. LITTLE CAT
    little cat Win User

    my hard drive is not repairing

    little cat, May 14, 2023
    #4
Thema:

my hard drive is not repairing

Loading...

  1. my hard drive is not repairing - Similar Threads - hard drive repairing

  2. Unable to repair second hard drive

    in Windows 10 Software and Apps
    Unable to repair second hard drive: Recently i found out that my second hard drive became corrupted. So i tried to repair it. However when i tried restart my PC and repair the hard drive, it'd take over a day to try to repair it, only for it to suddenly stop, boot my PC into Safe Mode and tell me, that the hard...

  3. Unable to repair second hard drive

    in Windows 10 BSOD Crashes and Debugging
    Unable to repair second hard drive: Recently i found out that my second hard drive became corrupted. So i tried to repair it. However when i tried restart my PC and repair the hard drive, it'd take over a day to try to repair it, only for it to suddenly stop, boot my PC into Safe Mode and tell me, that the hard...

  4. Repair a malfunctioning hard drive with new hard drive with new OS

    in Windows 10 Software and Apps
    Repair a malfunctioning hard drive with new hard drive with new OS: Say if I had a hard drive that had issues booting OS. Specifically not booting windows or being detected as installed and command prompt remedies were of no help.So instead I decide to do it my way by getting a new hard drive, unplugging the old non-booting one, and plugging...

  5. my hard drive is not repairing

    in Windows 10 Software and Apps
    my hard drive is not repairing: When I plug in my hard drive, the scanning and repair notification pops up so I press repair. The green loading bar gets finishes in about 2-3 minutes but it stays like that. I let it sit like that for a couple hours because I assumed I had a lot on my hard drive so it needed...

  6. Repairing external hard drive

    in Windows 10 Performance & Maintenance
    Repairing external hard drive: Hi all I store all of my photos and music on an external hard drive. Recently some photos didn't copy across properly - I deleted them but the hard drive is stuck cancelling the action and Windows is asking me to repair the drive with the message below: "We have found errors...

  7. Hard Drive OS Repair/Access on a hard drive attached as a external hard drive

    in Windows 10 Network and Sharing
    Hard Drive OS Repair/Access on a hard drive attached as a external hard drive: I have a computer originally from my son. It had not been running for 5-7 years, burnt power supply. I was updating to most current Win 10 and the files got corrupted at version 1909 and it won't boot. In Win PE recovery mode I've tried system restore, system reset, advanced...

  8. Hard Drive "Caution" questions and repair

    in Windows 10 Drivers and Hardware
    Hard Drive "Caution" questions and repair: I have a slave drive that is giving me Caution (according to Crystal). I have already backed it up using windows file explorer. MR would not back it up, but since there is no OS and it is not partitioned, it isn't an issue. I was wondering if this is a case of...

  9. "Scanning and repairing hard drive (c:)"

    in Windows 10 Ask Insider
    "Scanning and repairing hard drive (c:)": So since 3 days or so ive been getting this message every time i start my computer. It never finds any error though, it instantly goes to 100%. Should i be worried? submitted by /u/I_DONT_LIKE_KIDS [link] [comments]...

  10. How to repair a Hard drive

    in Windows 10 Drivers and Hardware
    How to repair a Hard drive: Hi i have a 2 TB Seagate internal HDD, I am unsure what happened, it’s not very old and has always been fitted inside a PC case, so hasn’t been knocked. Windows refuses to boot up with it connected. I unplugged the Sata data lead, allowed windows to boot then reconnected...